Use and Care Manual

Finishing and edge protection
Schluter
®
-Systems offers various finishing and edge-protection profiles for
outside corners and other tiled edges that can be used with any field tile,
thus reducing dependence on ceramic trim and increasing design options.
These profiles are available in a wide range of materials and finishes such as
stainless steel, anodized aluminum, brass, and colored PVC to produce a
variety of looks, including bold contrasts, discreet color matches to the grout,
and complements to plumbing fixtures.
Maintenance-free inside corners
Schluter
®
-Systems offers various cove-shaped profiles to address the
need to finish inside corners. These profiles can be used with any
field tile to produce permanent, easy to clean, and maintenance-free
floor/wall transitions and inside wall corners.
Ceramic and stone tiles are durable, easy to maintain, and hygienic, representing the ideal surface coverings for showers and bathtub surrounds. Exposed
tile edges, however, are unsightly and prone to cracking and chipping. While ceramic trim pieces such as bullnose or quarter round have traditionally been
used to finish and protect tile edges at the outside corners and perimeters of an installation, ceramic trim availability can be limited, particularly in imported
tile lines, which can in turn limit overall tile selection.
Ceramic cove base represents a neat, hygienic method for treating transitions at inside corners by providing a curved surface that prevents the collection
of dirt and is easy to clean. However, the limited availability of ceramic trim pieces has resulted in the use of sealant and caulk to treat such transitions.
These joints must be continually maintained throughout the life of the installation. This may include replacing the joints, which requires cutting the sealant
out and possibly compromising the waterproofing membrane.
TILE
TILE
PROFILES
Schluter
®
-QUADEC
Provides a square edge for a contemporary
and sleek design.
TILE
TILE
Schluter
®
-RONDEC
Provides a symmetrically rounded edge for
a smooth design.
TILE
TILE
Schluter
®
-DILEX-HKU
Allows for easy cleaning, will not trap debris.
Stainless steel finish.
Schluter
®
-DILEX-AHK
Allows for easy cleaning and will not trap
debris. Anodized and Tuscan color-coated
aluminum finishes.
Schluter
®
-DILEX-EKE
Provides a straight and discreet joint that
eliminates sealant at inside corners.
TILE
TILE
Schluter
®
-DILEX-PHK
Allows for easy cleaning and will not trap
debris. PVC profile.
Please refer to our Illustrated Price List or our website at www.schluter.com for details on the complete line of Schluter profiles and accessories available.
TILE
TILE
Details make the difference
PROFILES — Details make the difference 37