Instructions / Assembly
Installation Setup Guide
Think of each Lumenplay® Controller as the beginning of a new section to the installation. Each controller can either be controlled
simultaneously or individually, allowing for individual or unique-section installations.
Single Controller Installations
When setting up the light strings, think of how a marquee-style of moving lights would look based on each light’s placement.
Wreaths: Due to the circular shap
e, wreaths can be setup for very unique and exciting Place lights in circular spirals starting on
outside of wreath; or place lights one-in, one-out style, creating inner-wreath movement.
Christmas Trees: Make sure the lights are wrapped spirally around tree, allowing for up or down movement of light.
Roof Lines: Think of where the lights will go next, what areas they will cross, etc.
Multiple Controller Installations
Prior to placing lights on an installation, determine which structure, line or shape should be its own ‘section’. Be cognizant of
Controller placement, attempting to set all controllers as close as possible to each other; and of course, near outlets.
Lumenplay® App | Initial Setup
When opening the App, connect to controllers and immediately name and set the proper number of bulbs.
Lumenplay® App
Toggle On/O Firmware
Update Requirements:
Lights may not receive all
features of new app updates.
Automatically Connect to
ALL available Lumenplay®
Controllers upon App
Opening.
1
2
Connect to
Controller ”+” and
Change Settings:
Change Controller Name
Set Controller to Correct
Bulb Count
Finish and Save
1
2
3
Tips & Suggestions
• Connect to up to 8 Controllers for simultaneous control, setting all Controllers to same Scene.
• Connect to controllers individually to set a unique Scene for each Controller. When complete, disconnect from that
controller and connect to new controller.
Scene Creation
Swipe left and right to move to a Scene.
Press the “+” to create a new, blank Scene.
Press the “-” to delete the current Scene, forever.
Press the Lock Icon to make the current Scene non-editable.
Click to Choose a Song, initiating the Music Visualizer. Note: The Music Visualizer will be applied
to the currently selected Scene, using its Color Palette.
Randomizer: Uses the current Scene’s Color Palette, selects a random function and a random
speed, and plays it fo
r a random amount of time. Then repeats the process.
Name of the Scene. Click on the name to edit it.
1
2
3
4
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
CAUTION:
1. To reduce the risk of re and electric shock:
• Do not install on trees that have needles, leaves or branch covering of metal or materials which look like metal, and
• Do not mount or support strings in a manner that can cut or damage wire insulation.
2. Risk of re. This product does not contain lamp shunts, which allow the product to operate if one lamp burns out. Replace lamps only
with the spare lamps provided with this product.
WARNING:
1. Unplug the device before replacing the lamp.
2. Always ensure light set is unplugged when left unattended.
3. Read important safety instructions and caution notice i nside.
4. Strobe lights have been know to trigger seizures in people with photosensitive epilepsy.
2 3
Step 1: Turn the light
cap counter-clockwise
to release it by hand
from the lampholder.
Step 2: Pull lamp and
plastic base straight
out of lampholder.
Step 3: Replace lamp
with only 6 Volt, 0.54
Watt, LED type lamp
(provided with
product).
Step 4: Replace and
turn the light cap
clockwise onto the
lampholder.
Fuse
5
6
7
1
2
32 6
4
5
7
1
1
2
3
1. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications,
connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualied electrician for proper installation.
2. This seasonal use product is not intended for permanent installation or use.
3. Do not mount or place near gas or electric heaters, replaces, candles or other similar sources of heat.
4. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
5. Do not let lamps rest on the supply cord or on any wire.
6. Unplug the product when leaving the house, or when retiring for the night, or if left unattended.
7. This is an electric product – not a toy! To avoid risk of re, burns, personal injury and electric shock it should not be played with or placed where
small children can reach it.
8. Do not use this product for other than its intended use.
9. Do not hang ornaments or other objects from cord, wire, or light string.
10. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
11. Do not cover the product with cloth, paper or any material not part of the product when in use.
12. This product is equipped with push-in type lamps. Do not twist lamps.
13. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the
product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user
servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be
present and the product should be discarded.
14. Read and follow all instructions that are on the product or provided with the product.
15.
CAUTION– Connect only to controller from the same manufacturer, Cat No BLC-001.
SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS
1. When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are
brown or break o easily. Keep the tree holder lled with water.
2. If the product is placed on a tree, the tree should be well secured and stable.
3. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the
lampholders or enclosures, loose connections, or exposed copper wire.
4. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue
strain or stress on the product conductors, connections, and wires.
5. When not in use, store neatly in a cool, dry location protected from sunlight.
USER SERVICING INSTRUCTIONS
SAFETY PLUG WITH REPLACEABLE FUSE
Risk of re. Do not replace attached plug. Product contains a safety device (fuse) that should not be removed. Discard product if the attached plug is damaged.
Product should not be used if safety device (fuse) is removed.
1. Always unplug product from the receptacle or other outlet device before installing or replacing fuse.
2. Grasp plug to remove from receptacle or other outlet device. Do not unplug by pulling on cord.
3. To open fuse cover: Slide open fuse access cover on top of plug, towards the blades.
4. Remove fuses carefully by turning plug over.
5. Risk of re. Replace fuse only with 3 Amp, 125 Volt fuse (provided with product).
6. To close the fuse cover, slide back into place. Check to verify the fuse access cover on top of plug is securely closed.
TO REPLACE THE LAMP
If the new lamp base does not t in lamp holder, follow the step below before Step 3.
a) Remove the base or burned out lamp by straightening lamp leads and gently pull lamp out.
b) Thread leads of new lamp through holes in old base with one lead in each hole.
c)
After lamp is fully inserted into base, bend each lead up, like other lamps in the light set so that the leads will touch the contacts inside the lamp holder.
Grasp plug to remove from receptacle or other outlet device. Do not unplug by pulling on cord.