User Manual

Visit our Page LaisDcc
TM
Decoders Manual [e-mail]
www.laisdcc.com 2002-2018 ©LaisDcc
TM
10 / 17
And the Green wire and Purple wire is for Function 1 and Function 2.
Our decoders can do several interesting light effects. To change how a light
function operates, change its CV as follows.
White = CV49,
Yellow = CV50,
Green = CV51,
Purple = CV52
Light Direction Code:
Forward light direction code is 0
Reverse light direction code is 16
Both light direction code is 32.
The default setting of CV49 is 0 which means it will only on at Forward.
The default setting of CV50 is 16 which means it will only on at Reverse.
The default setting of CV51 is 32 which means it will on in both directions.
The default setting of CV52 is 32 which means it will on in both directions.
And we have some special light effect for you to use:
Light effect Code:
Light effect code is as following:
Constant Bright Light effect code =0
Random Flicker Light effect code =1
Mars Light effect code =2
Flashing Light effect code =3
Single Pulse Strobe effect code =4
Double Pulse Strobe effect code =5
Rotary Beacon effect code =6
Gyra Light effect code =7
Rule 17(dimmable light) effect code=8
Ditch Light Phase A effect code =10
Ditch Light Phase B effect code =11
Constant Dim Light effect code =12
Auto Mars effect code =13
Add the effect code to the direction code to get the value you need to
program to the CV of the wires/functions.
For example: If you want to make Green = Function 1 to be Random Flicker
and only on when Forward. Which you can find the direction code is 0 and the
effect code is 1, so you add direction code and effect code is 0+1=1 and the
Green wire (Function 1) is control by CV51, so you need program the sum 1 to