User Manual

Test of the LCD 12864 Module performed by Antonio T. (antaf) Rome

Italy on 20/01/2013

“ST7920_Serial” library tested with the current environment Arduino 1.0.3 (rel. 12/2012)

and ST7920_demo exemple file and I found a lot of errors during compilation. It works

perfectly with Arduino 0021 environment ( my board is Arduino Uno).

PAGE 1
Test of the LCD 12864 Module performed by Antonio T. (antaf) Rome Italy on 20/01/2013 “ST7920_Serial” library tested with the current environment Arduino 1.0.3 (rel. 12/2012) and ST7920_demo exemple file and I found a lot of errors during compilation. It works perfectly with Arduino 0021 environment ( my board is Arduino Uno).
PAGE 2
Wiring for LCD12864 Serial port to Arduino LCD12864 Module Serial port 2 1 4 6 3 5 Not Connected Not Connected 33 Pin 1 Marker Arduino D4 D3 Digital Pins GND 5 Volt Power Pins