Installation Guide

ManualsBrandsUnbranded ManualsLightingRound Disk Light Length 9 in. Nickel Recessed Integrated LED Trim Kit Round Fixture 3000K Warm White New Construction

TOOLS AND MATERIALS REQUIRED:

SAFETY PRECAUTIONS:

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.

2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON

FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

3. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.

PACKAGE CONTENTS

PART QTY PART QTY

A 1 E 1

B 2 F 2

C 2 G 1

D 1 H 1

This LED light is suitable to be dimmed by Major Brand Dimmers.

Max # of Lamps per 600W Dimmer: 4pcs LED-SM6D/BZ, LED-SM9D/WT, LED-SM9D/BN, LED-SM9D/BZ are only flush mount.

OPTION #1: FLUSH MOUNT OPTION #2: RETROFIT A RECESSED CAN

1. Prior to installation, install 1. Prepare fixture for recessed

mounting screws into the installation.

junction box. Do not drive - Remove lens by twisting

screws completely to the counter-clockwise.

end of the junction box.

- Place springs on

2. Connect supply wires to

mounting bracket then

wires on fixture with wire attach mounting bracket to

nuts or push wires into disc light with screws.

Quick Connector. Connect

white to white, black to

black, and copper wire - Insert wires into

to copper wire as

Quick Connector.

grounding connection.

Black to black and

white to white.

3. With the lens off the fixture,

attach disc light to mounting

screws, turn fixture

colockwise to lock. Tighten

2. Attach ground wire to groud

screws to firmly hold the

screw in recessed can.

fixture in place.

Turn E26 lamp holder into

socket base.

4. Complete the installation

by twisting the lens on the

Connect Quick connectors.

disc light.

Tuck all wires into recessed can.

Squeeze springs and release

them in bracket hooks and then

push up into recessed can.

Twist lens onto disc light.

LED DISC LIGHT

DESCRIPTION

LED disc light

Mounting bracket (use with option #2)

LED-SM4D/WT, LED-SM4D/BN, LED-SM4D/BZ, LED-SM6D/WT, LED-SM6D/BN,

Mounting screws

Springs (use with option #2)

Power connector

Quick connector (use with option #2)

Wire nut

E26 lamp holder (use with option #2)