Installation Guide

SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTAL
LATIONS CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF
THE PRODUCT AND THE HAZARDS INVOLVED.
3. CAUTION – RISK OF ELECTRIC SHOCK. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE
CORRECT BRANCH CIRCUIT CONDUCTOR.
Wiring supplies
as required by
electrical code
Drill
Wire Cutters
Phillips
Screwdriver
Pliers
TOOLS AND MATERIALS REQUIRED:
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO
PERSONS READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
LED VELOCE - Recessed Downlight
1. Drill hole in ceiling.
(thickness of the sheetrock ≥
1/2”).
2. Knock blind knockout open
in your required position and
install the Romex connector if
required (1/2” (not included)).
Open the top cover of the J-box by
unscrewing the screws. Connect
supply wires to wires on fixture
with wire nuts. Connect white to
white, black to black, green or
bare copper grounding wire to
Attach the J-box top cover and
secure with self- taping screws.
If wiring to another light, also
connect white to white, black to
black, green or bare copper
grounding wire to bare copper
3. Bring the light up to the
hole, hold in the spring clips and
push the light into the ceiling. It is
easier to do one spring at one
time.
This LED light is suitable to be dimmed by
Major Brand model# 6672, Major Brand
model# 6633
Ø 6-1/8”
(156mm)
A B
PACKAGE CONTENTS
PART
A
B
DESCRIPTION
QTY
LED disc light
Wire nut
1
3
Dimming levels may vary by dimmer
Black
Ground
White
Black
Ground
White
LED-SR6P
bare copper grounding wire.
grounding wire.