Use and Care Manual

STEP 3
No.1 and No.2 wire connect with the backrest and chair base.
No.3 wire connects with backrest and power cord(D).
No.4 wire connects with backrest and remote control(E).
No.5 wire connect the motor and the wire from rightside armrest, which use to connect the control panel.
No.6 wire connect the motor and power source (F).
NOTE
1: Two same color wires connect.
2: Plug power cord and power source into outlet, then you can use all function.
MUST BE ASSEMBLED
Backrest
Cushion
Remote control
Power cord
How to recline? How to get footrest latch down and stand?
Press
How to use remote control?
How to use charging port outside of
right armrest?
Turn on/off the massage function.
Turn on/off the heating function.
Control the massage intensity from low to high.
Select the heating temperature from M1 to M3.
Set a timer for massage from 15mins to 60mins.
Control Panel is for chair lift and reclining function,also has 1 USB-A outlets
and 1 USB-C outlet,which can keep your devices charging,such as nearly
all smartphone(like iPhone,Samsung...),iPad,headphones,Kindle etc.
Press
You can select different massage parts to enjoy.
You can select different massage mode to enjoy.
E
D
1
2
3
4
Control panel
Power Source
G
F
From motor
From rightside arm
5
6
From power source