Installation Guide

Step 4 Assemble 140-1/2" Long Back Wall
2. Install pre-cut wall studs between the top and bottom plates using 16d galvanized nails for
the treated bottom plate and 16d coated sinker nails for the top plate. Mark this panel as 'BL'.
3. Square the wall frame. Install the first siding panel with the 'LAP edge' extending 3-1/2"
beyond the end of the wall. Secure using 8d galvanized box nails spaced 8" apart.
4. Install (2) two more siding panels.
1. Cut (1) one treated 2x4-12' and (1) one untreated 2x4-12' to a length of 140-1/2". Position
the boards together and indicate with 'X' marks, where the wall studs will be located.
X
X
X
X
X
X
X
X
Treated Bottom Plate
Untreated Top Plate
19-3/4"
140-1/2" Wall Plate
24"
24"
Siding Extends 3-1/2"
Beyond 2x4 Frame
19-3/4"
stud space
LAP Edge
Install siding flush for concrete slab
or 3/4" below plate for wood floor.
BL
140-1/2" Treated Plate
140-1/2" Untreated Plate
19-3/4"
:
:
:
:
:
:
:
BL