6 Stage AIR PURIFIER MA-4000 INSTRUCTION MANUAL CAUTION: Read manual carefully for proper installation and operation.
CONTENTS Specifications......................................................................3 Features.................................................................................3 Introduction........................................................................4 Installation...........................................................................4 Back Cover & Filter Removal........................................5 Placing the Unit..................................................................
Filter Cleaning and Replacement SPECIFICATIONS Pre-Filter - clean regularly by removing the filter from the unit and vacuum the filter with the hand held attachment to remove pet dander, dust, and other large particles. The Pre-filter can also be cleaned by running it under cool water and then use a toothbrush to gently remove particulates.
To reduce the risk of electric shock, this equipment has a grounding type plug that has a third (grounding) pin. This plug will only fit into a grounding type power outlet. If the plug does not fit into the outlet, contact qualified personnel to install the proper outlet. Do not alter the plug in any way. WARNING! - Do not operate without proper installation. Doing so may void the warranty. CAUTION! – Cut off the power when performing maintenance.
Troubleshooting – What to look for first: The fan is operating but the unit won't produce any ozone. What's wrong? BACK COVER & FILTER REMOVAL Installing Ozone Plates and Filters Check the air purifier plate(s) for serviceability. If they are cracked or broken, the plate(s) will require replacement. Step 1: Make sure the unit is unplugged before installing, removing any filters or maintaining the unit in any way, to prevent electric shock.
SETTINGS AND ADJUSTMENTS Buttons function and Operation Description TROUBLESHOOTING GUIDE Indicators of Operation: (Operation of the Ozone & Power Indicator Lamp) The ozone generator should be operated when the room is unoccupied. Open the door and window when you return to the room if ozone operated for several hours. # 1 Name Function & Operation POWER Standby mode: Press the POWER button to turn the unit on. Press again to turn unit off. Unit will operate at default settings for 1,600 sq. ft.
Fan Blade and Front Grill Cleaning: LCD Display (Take off front/reinstall grill method) To remove for cleaning: As the detail on the left shows, hold bottom of front grill and pull out. When latch releases from front panel, lift front grill approximately 30 degrees. Pull front grill away from unit in a parallel motion. To reinstall after cleaning: Place top latch of grill in front panel opening. No Name 1 Fan working status 2 HIGH purifying reminder Push bottom latch of grill into bottom slot.
Remote control function and description Press to turn ozone on and off. 9 OZONE Note: PURIFY does not work if ozone is off (Note: Ozone can only be used in an unoccupied space). Press to turn UV on or off. 10 UV CAUTION! Always ensure the room or area is UNOCCUPIED before operating the above-described Ozone control. No 1 Name Function and operation instruction POWER Stand by mode: Unit will turn on when the Power button is pressed. Press Power again to turn unit off. Press one time: 1200 sq. ft.