Datasheet

15
MARR-5 Features and Benefits
DIMENSIONS (in) mm
Notes 1) For details on electrical specifications, contact Hamlin.
2) Contact rating-Product of the switching voltage and current should never exceed the
wattage rating.
Contact Hamlin for additional load/life information.
3) Operate (inc. bounce) /Release Time-per EIA/NARM RS421A, diode suppressed coil.
4) Pull in Range-Contact Hamlin for tolerances available within this range.
5) Rating Sensitivity-The value at which contact ratings and operating characteristics are
determined. Derating may be required below this value.
6) MARR-5 Switching current is limited to 1ma at 1000 Vdc. Higher voltages and currents can
be switched using correct suppression circuitry (consult Hamlin).
7) Storage Temperature-Long time exposure at elevated temperature may degrade
solderability of the leads.
Switch Type MARR-5
Contact Form A
Underwriters Laboratories Recognised, File E47258 (see note 1)
ELECTRICAL RATINGS
Contact Rating (2) Watt - max. 10
Voltage Switching (6) Vdc - max. 1000
Breakdown Vdc - min. 2000
Current Switching A - max. 0.5
Carry A - max. 1.3
Resistance Contact, Initial Ω - max. 0.100
Insulation Ω - min. 10
12
Capacitance Contact pF - typ. 0.2
Temperature Operating °C -75 to +125
Storage (7) °C -75 to +125
OPERATING CHARACTERISTICS
Operate Time (3) ms - max. 0.75
Release Time (3) ms - max. 0.3
Shock 11ms
1
⁄2 sine wave G - max. 100
Vibration 50-2000 Hertz G - max. 30
Resonant Frequency Hz - typ. 3200
MAGNETIC CHARACTERISTICS
Pull-In Range (4) Ampere Turns 17-38
Rating Sensitivity (5) Ampere Turns 35
Test Coil L4989
Features
• Miniature normally open switch
with 19.69mm x 2.66mm (0.775”
x 0.105”) glass envelope
• Capable of switching 1000Vdc at
up to 1mA
• Minimum voltage breakdown
2000 Vdc
• 10
12
Ohms insulation resistance
• Available sensitivity range 17-38 AT
Benefits
• Hermetically sealed switch
contacts are not effected by and
have no effect on their external
environment
• Low, stable contact resistance
• Zero operating power required
for contact closure
• Fit and forget durability
Applications
• Reed relays (particularly suitable
for high voltage breakdown
applications)
• Security
• Limit switching
• Telecoms line switching
• Office equipment
• Automotive applications
INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY
PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information
specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.
Hamlin USA Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin UK Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamlin Germany Tel: [phone] • Fax: [phone] • Email: [e-mail]
Hamectrol France Tel: [phone] • Fax: [phone] • Email: [e-mail]
www.hamlin.com
ISSUE No: 4 DATE: 1/5/3