Installation Instructions

1
2"minimum
Deck framing
Deck framing
F-1
A-1
F-2
A-1
2/6
Mount posts(Fence with 38" post, A-2):
-Wood blocking tied to deck frame must be installed and constructed
with treated dimensional lumber with a minimum thickness of 1-1/2".
-Position the edge of post base plate a minumum of 1/2" from the
inside edge of rim joist.
-Select the positions where the posts(A-2) are installed according to the
length of the assembled fence.
-Use 5/16" drill to pre-drill wood flooring, and fix the post with 3/8"x3"
hex head wood screws(F-1).
-The concrete floor is pre-drill with a 3/8" impact drill and bolted with
3/8"x3" hexagonal galvanized expansion screws(F-2).
Wood screws for solid
wood floors.
Concrete floor fixed
with expansion screws.
Retail Pack SKU Components Code Specificaon Q'ty Retail Pack SKU Components Code Specificaon Q'ty
171-0878 44" Post A-1 44"x3"x3" 1 Outer Hexagon Screw H 5/16"x1-1/2" 4
171-0876 38" Post A-2 38"x3"x3" 1 Plasc Decorave Cover I 13/16"x3/4" 4
171-0870 6' Panel (Straight) B-1 72"x32-1/2" 1 Decorave Base Q 5-29/32"x5-29/32"x1-1/4" 1
171-0872 8' Panel (Straight) B-2 96"x32-1/2" 1 Wood Screw F-1 3/8"x3" 4
171-0874 6' Panel (Stair)
K 70-3/4"x32.5"x1-3/16" 1 Expansion Screw F-2 3/8"x3" 4
171-0890 6' Panel Cover Sleeve G 75"x1-9/16"x1-3/16" 2 Counter Fix Screw C 3/16"x1-3/16" 4
171-0892 8' Panel Cover Sleeve R 98-1/2"x1-9/16"x1-3/16" 2 22° Angle Bracket N 1"x1"x13/32" 4
Counter Fix Screw C 3/16"x1-3/16" 4 Joint Screw E 5/16"x1-1/2" 4
Straight Bracket D-1 1"x1"x1" 4 22° Le Decoraon Set L-1 1-1/4"x1-1/4"x1-17/32" 2
Joint Screw E 5/16"x1-1/2" 4 22° Right Decoraon Set L-2 1-1/4"x1-1/4"x1-
17/32" 2
Vercal Decking J 1-1/4"x1-1/4"x1" 4 Counter Fix Screw C 3/16"x1-3/16" 4
Counter Fix Screw C 3/16"x1-3/16" 4 45° Angle Bracket O 1"x1"x15/16" 4
Stair Bracket-Boom D-2 2-3/4"x1-3/8"x1-3/4" 2 Joint Screw E 5/16"x1-1/2" 4
Stair Bracket-Top D-3 2-3/4"x1-3/8"x1-3/4" 2 45° Le Decoraon Set M-1 1-1/4"x1-1/4"x2-3/8" 2
Joint Screw E 5/16"x1-1/2" 4 45° Right Decoraon Set M-2 1-1/4"x1-1/4"x2-3/8" 2
Item Configuraon Table
171-0880
(Hardware Kit - Straight)
171-0884
(Hardware Kit -
Stair)
171-0882
(Hardware Kit - Post)
171-0886
(Hardware Kit - 22 Degree)
171-0888
(Hardware Kit - 45 Degree)