Instructions / Assembly

11 HAMPTONBAY.COM

Please contact 1-800-527-0998 for further assistance.

Attaching the light kit plate

to the mounting ring

□ Remove one of three mounting ring screws (WW) and

loosen other two screws on the mounting ring (K).

Place the key holes on the light kit plate (F) over the two

mounting ring screws (WW) previously loosened from

the mounting ring (K), and turn the light kit plate (F)

until it locks in place at the narrow section of the key

holes. Secure the light kit plate (F) by tightening the two

screws (WW) previously loosened and replacing the one

previously removed.

□

Attaching the light kit to the

light kit plate

□ Remove the three screws (XX) on light kit plate (F).

□ While holding the light kit assembly (G) under your fan,

rmly snap the wire connection plugs (YY) together.

□ Carefully push all wires back into the light kit (G), then

install the light kit assembly (G) onto the light kit plate (F)

with the three screws (XX) previously removed. Be sure to

tighten all screws securely.

Assembly — Installing the Light Kit