Item #301-469 Model #14414 USE AND CARE GUIDE HOLLANDALE 52 INCH CEILING FAN Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-527-0998 HAMPTONBAY.
Table of Contents Table of Contents ..........................................................2 Operation ......................................................................13 Safety Information .........................................................2 Care and Cleaning .......................................................13 Warranty .........................................................................3 Troubleshooting ..........................................................
Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to actual size unless noted otherwise in the table below. AA EE GG BB CC FF HH DD Part Description Quantity AA Blade screw (3/16”x8mm) 16 BB Fiber washer (not to scale) 16 CC Blade bracket screw (1/4”x12.7mm) 11 DD Mounting plate screw (1/4”x12.
Pre-Installation (continued) PACKAGE CONTENTS C D A E F H B G Part Quantity Part Description Quantity A Blade 5 E Fan housing 1 B Blade bracket 5 F Light kit plate 1 C Mounting plate 1 Light kit (Socket ring preassembled) 1 D Fan motor assembly 1 G H Glass shade 4 Description 5 HAMPTONBAY.COM Please contact 1-800-527-0998 for further assistance.
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock, or personal injury, mount the fan to an outlet box marked acceptable for fan support using the screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly — Hanging the Fan 1 2 Attaching the mounting plate to the electrical box WARNING: To reduce the risk of fire, electric shock or other personal injury, mount the fan only to an outlet box or supporting system marked acceptable for fan support and use the mounting screws provided with the outlet box. □ Hanging the fan motor assembly from the mounting plate □ Align the slot hole in the fan motor assembly mounting bracket (I) to the J hook on the mounting plate (C).
Assembly — Hanging the Fan (continued) 3 Making the electrical connections □ WARNING: To avoid possible electrical shock, be sure electricity is turned off at the circuit breaker or main fuse box before wiring. QQ: Fan wall control RR: Light wall control SS: Fan wall control output wire TT: Light wall control output wire WARNING: Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire nuts, except for the ground wire.
Assembly — Hanging the Fan (continued) 4 5 Attaching the fan motor assembly to the mounting plate □ After completing the electrical connections, align the four screw holes between the mounting bracket (I) and the mounting plate (C). Insert the mounting plate screws (DD) through the mounting bracket (I) and into the mounting plate (C). Tighten all screws securely. □ Finishing the fan installation Remove the two screws (UU) and loosen the two screws (VV) on the mounting plate (C).
Assembly — Attaching the Fan Blades 6 7 Fastening the blade to the blade bracket □ Attach the fan blades (A) to the blade brackets (B) by using three blade screws (AA) and fiber washers (BB). Tighten screws (AA) and fiber washers (BB) securely. Fastening the blade assemblies to the motor □ Tighten the blade assemblies (J) onto the bottom of the motor by using the blade bracket screws (CC).
Assembly — Installing the Light Kit 8 9 Attaching the light kit plate to the mounting ring □ Remove one of three mounting ring screws (WW) and loosen other two screws on the mounting ring (K). □ Place the key holes on the light kit plate (F) over the two mounting ring screws (WW) previously loosened from the mounting ring (K), and turn the light kit plate (F) until it locks in place at the narrow section of the key holes.
Assembly — Installing the Light Kit (continued) 10 Installing the glass shades and bulbs □ To install the light kit glass shades (H), remove the socket rings (ZZ) on the light kit (G) and install the glass shades (H) to the light kit (G). Secure by tightening the socket rings (ZZ) previously removed. □ Install the four 40W candelabra bulbs (HH). (included) □ Attach the pull chain fob (FF) to the chain on the light kit (G). □ Restore power and your light kit is ready for operations.
Operation Turn on the power and check the operation of your fan. There are two pull chains used to operate your fan. The 3-speed pull chain controls the fan speed as follows: 1 pull- High, 2 pulls- Medium, 3 pulls- Low, and 4 pulls- Off. The light kit pull chain turns the light kit "ON" or "OFF." The reverse switch is located on the surface of the switch housing. This switch controls directions: forward (switch left) or reverse (switch right).
Troubleshooting WARNING: Ensure the power is off at the electrical panel box before you attempt any repairs. Refer to the section “Making the Electrical Connections” on page 8. Problem The fan will not start. The fan sounds noisy. The fan wobbles. Solution □ Check the main and branch circuit fuses or breakers. □ Check the line wire connections to the fan and switch wire connections in the switch housing.
Service Parts AA EE E F BB A FF G B CC GG DD HH C H D Part Description Part Description A Blade AA Blade screw (3/16”x8mm) B Blade bracket BB Fiber washer C Mounting plate CC Blade bracket screw (1/4”x12.7mm) D Fan motor assembly DD Mounting plate screw (1/4”x12.7mm) E Fan housing EE Plastic wire nut F Light kit plate FF Pull chain fob G Light kit (Socket ring preassemblde) GG Balancing kit H Glass shade HH 40W candelabra bulb 15 HAMPTONBAY.
Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-527-0998 HAMPTONBAY.COM Retain this manual for future use.
