Use and Care Manual

ManualsBrandsUnbranded ManualsElectricalBeecaster Pro Desktop USB Microphone

Your Beecaster is friendly, and assimilates well with all species when properly introduced. The following instructions will

ensure the Beecaster’s gracious acceptance into its new colony.

Windows 8, Windows 7, and Windows Vista

1. Connect the Beecaster to your computer with the included cable. The square end (Type B) connects to the back of the

Beecaster’s base, while the ﬂat end (Type A) connects to a USB port on your computer. The lights surrounding the control

knobs illuminate when the Beecaster is receiving power.

2. Go to the Start menu, and open the Control Panel.

3. From the Control Panel, click on the Sound icon.

4. Select the Recording tab, then select Beecaster USB.

5. Select the Playback tab, and again select Beecaster USB. From this window, you can also adjust your computer’s master

output volume. Initially set it at 100%, then use the Volume control on the Beecaster’s base to adjust the headphone output level.

Please note: Your computer will recognize the Beecaster as both an input device (microphone) and an output device (headphone ampliﬁer),

so all of your computer’s audio will be routed to the Beecaster. You can change this if necessary in the Control Panel/Sound window, or in your

recording program’s settings. Also in this window, you can adjust the microphone monitoring level by moving the Microphone fader to the left or right.

Mac (OSX 10.4.11 or higher)

1. Connect the Beecaster to your Mac with the included cable. The square end (Type B) connects to the back of the

Beecaster’s base, while the ﬂat end (Type A) connects to a USB port on your Mac. The lights surrounding the control

knobs illuminate when the Beecaster is receiving power.

2. From the Apple menu, select System Preferences.

3. Click on the Sound icon.

4. Select the Input tab, then select Beecaster USB.

5. Select the Output tab, and again select Beecaster USB. From this window, you can also adjust your Mac’s master output

volume. Initially set it at 100%, then use the volume control on the Beecaster’s base to adjust the headphone output level.

Please note: Your Mac will recognize the Beecaster as both an input device (microphone) and an output device (headphone ampliﬁer), so all of your com-

puter’s audio will be routed to the Beecaster. You can change this if necessary in the Sound Preferences window, or in your recording program’s settings.