PORTABLE AUTOMATIC ICE MAKER Model: MIM-18(A~Z) INSTRUCTION MANUAL It is important that you read these instructions before using your portable ice maker. It is strongly recommend that you keep them in a safe place for future reference.
TABLE OF CONTENTS IMPORTANT SAFEGUARDS……………..…………………………………….…………..2-3 IMPORTANT SAFETY INSTRUCTIONS …………………………………………………….3 PARTS IDENTIFICATION..............…………………………………………………...……4-5 OPERATING PROCEDURES & MAINTENANCE UNPACKING YOUR ICE MAKER…..…………………………………………………………5 CONNECTING YOUR ICE MAKER………………….…………………………………….....6 HOW TO CLEAN.................................................................................................................6 CARE AND MAINTENANCE.....................................
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance. • • • • • • • • • • • • • • • • • • • • • • Do not operate this or any other appliance with a damaged cord. Connect to properly polarized outlets only. No other appliance should be plugged into the same outlet. Be sure that the plug is fully inserted into the receptacle.
IMPORTANT SAFEGUARDS (CONT.) • • • Always attach plug to appliance first, then plug cord into wall outlet. To disconnect, turn all controls to the OFF position, grasp plug body and remove from the electrical outlet. Do not pull by the cord. Do not store any materials other than the manufacturer’s recommended accessories in this appliance when it is not in use. Do not use the appliance for other than its intended use.
PARTS IDENTIFICATION Evaporator Rods 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Silicon Water Drain Stopper - For draining water from the water reservoir. Water Reservoir - holds up to 1.7L of water. Compressor 13 Power Cord Top Lid Viewing Window Back Top Cover Control Panel - Easy to use, visible functions and 1-touch display setting. Water Tray Evaporator Rods Ice Case Panel - The panel that pushes already formed ice into the Ice Basket.
PARTS IDENTIFICATION (CONT.) Control Panel Operation SIZE S (SMALL) or L (LARGE): Press to select the size of ice to make. Choose between size Small and Large. ON/OFF: Press to power unit on or off. ADD WATER: This light will turn on along with a beep indicator when the water level is too low. You will need to add water to the Water Reservoir and press the „Power‟ button twice to restart the ice maker.
OPERATING PROCEDURES AND MAINTENANCE (CONT.) CONNECTING YOUR ICE MAKER ! DANGER Improper use of the grounded plug can increase the risk of an electrical shock. If the power cord is damaged, please call our customer service department. (Contact information on p.11) 1. 2. 3. This unit should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which plugs into a standard three prong wall outlet to minimize the possibility of electric shock.
OPERATING PROCEDURES AND MAINTENANCE (CONT.) CARE AND MAINTENANCE The ice maker should be cleaned on a regular basis. (See the “HOW TO CLEAN” section on p.6) It is necessary to have an adequate ventilation space around the ice maker in order to sustain proper performance, dissipation of heat, maintain efficiency, and low power consumption. Clearance of a minimum of 5 inches should be maintained at the rear and sides of the unit, and 8 inches at the top of the unit.
TROUBLESHOOTING PROBLEM Indicator lights are on but display is not on. “Ice Full” indicator is on. The compressor works abnormally with a buzzing noise “Add Water” indicator light is on. The ice made is too large and cubes are sticking together. “Add Water” & “Ice Full” indicators both light up. www.maxi-matic.com POSSIBLE CAUSE SOLUTION Blown fuse/ No power. Replace fuse/ Turn power on. Ice basket is full. Remove ice from ice basket. The voltage is lower than recommended.
Machine keeps running but the water is warmer than the normal temperature. The magnetic valve is broken. Replace the magnetic valve. Ambient temperature or water temperature in inner tank is too high. Please operate the ice maker below ambient temperature of 90°F and use cold water. Ice making cycle is normal but no ice is made. Refrigerant liquid leakage. Consult a qualified technician. Pipe in the cooling system is blocked. Consult a qualified technician.
MORE SPECIAL TIPS AND GUIDES • • • • • • Leaking Water: • Rubber Drain Stopper may be missing or not inserted properly. If missing, please contact customer service for a replacement rubber insert. • Check if unit still leaks water when power is unplugged. If unit does not leak water when power is unplugged then the water is leaking from the water pump. Please contact customer service for a replacement water pump.
1. 2. 3. 4. 5. 6. 7. LIMITED WARRANTY* ONE (1) YEAR WARRANTY IS ONLY VALID WITH A DATED PROOF OF PURCHASE Your small kitchen appliance is built with precision, inspected and tested before leaving our factory. It is warranted, to the original purchaser to be free from any manufacturing defects under normal use and conditions for one (1) year, cord excluded. This Warranty applies only to the original purchaser of this product.
RETURN INSTRUCTIONS RETURNS: A. B. Any return of defective merchandise to the manufacturer must be processed accordingly by first contacting customer service (contact information shown below) to obtain an RA # (Return Authorization Number). We will not accept any returns of merchandise without an applicable RA #. IMPORTANT RETURN INSTRUCTIONS. Your Warranty depends on your following these instructions if you are returning the unit to Maxi-Matic USA: 1.