Installation Guide

OPERATING PROCEDURES AND MAINTENANCE (CONT.)
CONNECTING YOUR ICE MAKER
DANGER
Improper use of the grounded plug can increase the risk of an
electrical shock. If the power cord is damaged, please call our
customer service department. (Contact information on p.11)
1. This unit should be properly grounded for your safety. The power cord of this appliance is
equipped with a three-prong plug which plugs into a standard three prong wall outlet to
minimize the possibility of electric shock.
2. Plug your appliance into its own, properly installed, grounded wall outlet.
Do not under any
circumstances cut or remove the third (ground) prong from the power cord.
Any questions
concerning power and/or grounding should be directed toward a certified electrician.
3. This appliance requires a standard 120 volt, 60Hz electrical outlet with three-prong ground.
The ice maker is not designed to be installed in an outside area such
as a garage or a porch. Ambient temperatures of below 65°F or
above 90°F will hinder the performance of the appliance.
*
BEFORE USING YOUR ICE MAKER, IT IS STRONGLY RECOMMENDED TO CLEAN IT
THOROUGHLY.
HOW TO CLEAN
1. Remove the ice basket.
2. Unplug the Drain Stopper to drain out all water inside.
3. Clean the interior with diluted detergent, warm water and a soft cloth.
4. Clean the exterior of the ice maker regularly with a mild detergent solution and warm water.
5. Dry the interior and exterior with a soft cloth.
Note:
Make sure all parts are thoroughly dry before reassembling your unit. Insert the Drain
Stopper back into the Ice Maker.
6. When the machine is not in use, unplug the Drain Stopper to drain water completely from water
reservoir.
MOLD FORMATION CAN OCCUR IF MOISTURE GETS TRAPPED INSIDE OF THE UNIT. DRAIN ALL
WATER FROM THE UNIT AFTER EVERY USE AND DRY THOROUGHLY BEFORE STORING.
!
www.maxi-matic.com
6
[e-mail]