Installation Guide

WARNING

Window guards are designed to be a deterrent to accidental window falls. This product is not intended

as a substitute for proper adult supervision.

Failure to follow all of the manufacturer’s installation and safety instructions may reduce the

effectiveness of the guard and increase the risk of accidental window falls.

This window guard is intended to protect against potential falls by children age 5 and under.

AC Window Guards are not meant to protect children from intruders.

INSTALLATION TIPS

Before installation, consult building and fire codes. Contact local building code department or fire

department for specific codes that may apply in your area.

All screws must be anchored firmly into a solid stud or frame material for proper operation of guard.

There should be no open spaces in the guarded area or window opening exceeding 4 inches.

Parents, caregivers, and older children must understand the operation of this window guard in case of

an emergency.

Refer to installation instructions and product specifications to ensure window guard is properly

installed.

WINDOW SAFETY TIPS

Window falls can happen in the blink of an eye. Always supervise children near open windows.

Install window guards that can easily be removed by adults and older children in the event of an

emergency.

There should be no openings in the window exceeding four inches.

Don’t place furniture near windows that children may climb.

Window screens are not strong enough to prevent falls.

PAGE 1
WARNING Window guards are designed to be a deterrent to accidental window falls. This product is not intended as a substitute for proper adult supervision. Failure to follow all of the manufacturer’s installation and safety instructions may reduce the effectiveness of the guard and increase the risk of accidental window falls. This window guard is intended to protect against potential falls by children age 5 and under. AC Window Guards are not meant to protect children from intruders.
PAGE 2
Teach children not to play with, climb, or open windows. INSTALLATION INSTRUCTIONS Single/Double Hung Windows Step #1: Open the window (make sure children are not around). Step #2: place AC Window Guard in the window opening and stretch open the guard until both end posts are inside the window rail. Step #3: Drill holes for end post by lining up drill bit with center of pre-cut openings on the end post (five openings on each side of end post).