Product Literature

22
SPECIFICATIONS
Operational
• Operating pressure range: 20-75 psi
• Recommended operating pressure: 30 psi
• Flow Rate: 0.05 – 4.58 gpm
• Nozzle trajectory:
- 5’: 5° - 8’: 10° - 10’: 17° - 12’: 24° - 15’: 28°
- Corner and Side Strips: 17°
- 8’ Flat Spray: 0°
Warranty
• Two years
Toro
®
MPR Plus nozzles make system design and
installation easier than ever. Simply select the needed
radius and arc–the nozzle does everything else.
Matched Precipitation Rates
Ensures all nozzles with a common radii apply water at
approximately the same rate.
Pre-installed Pressure Compensation Disc
Eliminates excessive misting, conserves water and provides
precise flow rates.
FEATURES & BENEFITS
Additional Features
Customized screens for each nozzle
Fine-mesh snap-in filter screens for lower flow nozzles
Convenient nozzle packaging – nozzles and screens packed
separately
Adjustment screw allows up to 25% reduction in radius and
complete shuto
MPR PLUS SPRAY NOZZLES
MPR PLUS SPRAY NOZZLES MODEL LIST
Model Description Model Description
5’ MPR PLUS NOZZLE–RED 8’ MPR PLUS NOZZLE–GREEN
5Q
5T
5H
5TT
5TQ
5F
90° Arc
120° Arc
180° Arc
240° Arc
270° Arc
360° Arc
8Q
8T
8H
8TT
8TQ
8F
90° Arc
120° Arc
180° Arc
240° Arc
270° Arc
360° Arc
8’ FLAT SPRAY–BLACK 10’ MPR PLUS NOZZLE–BLUE
FSQ
FSH
FSF
FSQ-LG
FSH-LG
FSF-LG
90° Arc
180° Arc
360° Arc
90° Arc, low flow
180° Arc, low flow
360° Arc, low flow
10Q
10T
10H
10T T
10TQ
10F
90° Arc
120° Arc
180° Arc
240° Arc
270° Arc
360° Arc
12’ MPR PLUS NOZZLE–BROWN 15’ MPR PLUS NOZZLE–BLACK
12Q
12T
12H
12T T
12TQ
12F
90° Arc
120° Arc
180° Arc
240° Arc
270° Arc
360° Arc
15Q
15T
15H
15T T
15TQ
15F
90° Arc
120° Arc
180° Arc
240° Arc
270° Arc
360° Arc
SPECIAL PATTERNS–ORANGE
4SST
4EST
4CST
9SST
4SSST
2SST
Side Strip 4’x30’
End Strip 4’x15’
Center Strip 4’x30’
Side Strip 9’x18’
Side Strip 4’x18’
Side Strip 2’ x 6’
Specifying Information—MPR Plus
XX-XXX-PC
Radius Arc Optional
XXX XXX PC
5—5’
8—8’
10—10’
12—12’
15—15’
Q—90° T—120°
H—180°
TT—240° Q—270°
F—360°
EST—End Strip
CST—Center Strip
SST—Side Strip
PC—Pressure
Compensation
Example: A 570 MPR Plus Nozzle with a spray of 10’, 180° arc and pressure
compensation, would be specified as: 10-H-PC
Note: To specify a MPR Plus nozzle with a 570Z sprinkler body,
attach the body specification before the above nozzle specification.
Do not use PCDs with 570Z PR & 570Z PRX models