Instructions

www.ti.com

Additional Resources

You can obtain the MSP430 USB Developers Package in these ways:

• Download and install CCS, which contains MSP430Ware if the appropriate box is checked during

installation.

• Download it as part of MSP430Ware

• Download it as a separate download

If you have already installed CCS, you probably already have the USB Developers Package. Click the

View menu, click TI Resource Explorer, and go to the USB Developers Package under Libraries.

If using IAR, either MSP430Ware or the USB developers package can be downloaded. The latter is a

smaller download but does not include the TI Resource Explorer (see Section 4.5), the full version of

driverlib, and other tools and libraries.

Note that the current revision of the MSP430 USB Developers Package requires CCS v5.5 or IAR v5.51.

These are newer versions than are required to run the examples included with the F5529 LaunchPad.

4.5 MSP430Ware and TI Resource Explorer

MSP430Ware is a complete collection of libraries and tools. It includes driverlib and the USB Developers

Package used in the software demo. By default, MSP430Ware is included in a CCS installation. IAR and

mspgcc users must download it separately.

MSP430Ware includes the TI Resource Explorer for easily browsing the tools. For example, Figure 38

shows all of the USB examples in the MSP430 USB Developers Package.

SLAU533A–September 2013–Revised January 2014 MSP430F5529 LaunchPad™ Development Tool (MSP

‑

EXP430F5529LP)

Submit Documentation Feedback