Instructions / Assembly
How to use your Portable Outdoor Grill
Aer reading the Manual in full, including Safety Warnings, you will be ready
to start grilling!
• Step 1: Remove Grill from packaging and remove all packing
material. Read through entire Instruction Manual and warnings prior
to operating the Grill.
• Step 2: Install 4 AA batteries in the Battery Box. Firmly press together
each side and the Battery Box can be pulled out. Once batteries are
installed properly, push Battery Box back in and ensure it is secure.
(Refer to Battery Warnings)
• Step 3: Place Grill on stable, nonammable surface.
• Step 4: Turn the Grill to Max.
• Step 5: Remove Charcoal Bowl from Grill unit. Put charcoal into
Charcoal Bowl. Do not let the charcoal exceed the top rim of the
Charcoal Bowl. This may cause the food to burn. Set aside.
• Step 6: Add re accelerator product of your choice:
How to Add Alcohol Gel:
• Apply Gel (approximately 25-30g) to the concave center
of the Charcoal Base.
How to Add Solid Alcohol Blocks
• Use 15g-20g. Either small pieces or one large block.
• Place blocks on the concave center of the Charcoal Base.
o WARNING: Do not use both Alcohol Gel and Solid Alcohol
Blocks. If you cannot measure accurately the amount you
are using, do not let it exceed the “MAX” line.
• Step 7: Ignite the Alcohol Gel or Solid Alcohol Blocks using lighter.
• Step 8: Using the provided Tool, lower the Charcoal Bowl (lled with
charcoal) down into the Charcoal Base. (Refer to How To Use Tools)
o The rst 3-5 minutes the Grill will smoke more than normal.
Alcohol Gel