Instructions / Assembly

Instructions for assembling Sliding Door Cabinets
Place the slide on the cabinet box first. The end of the slide (the part that slides out) needs to
be even with the edge of the cabinet box on whichever side you intend to have the door slide
to. So if you’re going to slide it open Left, you’ll place the slides on so that the opening end of
the slide that opens is even with the left side frame of the cabinet.
Open the slide and screw it to the frame using the holes in the bottom of the slide that are
provided.
Next, flip the door upside down on a flat, stable surface. Turn the cabinet with the slides
upside down and place it inside the door. There should be just enough clearance at the top
and bottom so that the door doesn’t drag on the cabinet frame.
Slide the cabinet and the slides open keeping them exactly where they are and screw the slide
to the back of the door itself using the holes provided when the slide is open.
When you are finished, the slide should slide your door open and close it completely so that it
is flush with the side of the cabinet frame.