Instructions / Assembly

WG Wood Products
Installation Instructions
Wall Mirror/ Mirror or Glass Door Assembly:
In order to get your product to you safely, we may package things in different manners depending on the product involved, size, etc.
Often times, we will pack mirrors or glass in a separate box of their own. Other times, we will pack them in with the cabinet itself,
sometimes in the door frame itself.
Re-assembly is very easy. An instructional video which shows you how to put your mirror or door together is available on the
website direct at:
http://www.wgwoodproducts.com/store/agora.cgi?cartlink=Installation_Videos.htm
For wall mirrors – clips and screws have been provided to secure the mirror and back panel into the frame.
For mirror doors - clips and screws have been provided to secure the mirror and back panel into the frame.
For Clear glass doors or art glass doors – vinyl track MAY work, but you may have to resort to the clips and screws to secure it in
the frame. The vinyl track is really designed for 1/8” panels, but most of the glass panes are 3/16 or thicker. Depending on how it is
cut, sometimes the vinyl track will work. We have provided both for you.
For inset panel doors – Use the vinyl track to secure this panel in the door frame.
For Beadboard panel doors - vinyl track MAY work, but you may have to resort to the clips and screws to secure it in the frame.
The vinyl track is really designed for 1/8” panels, but most of the glass panes are 3/16 or thicker. Depending on how it is cut,
sometimes the vinyl track will work. We have provided both for you.
Frosted glass panel - Use the vinyl track to secure this panel in the door frame.
IMPORTANT : DO NOT over-tighten the clips and screws as it can crack the frame or the clip. It ONLY NEEDS TO BE
SNUG TO HOLD THE PANEL IN PLACE.
For additional help or to watch an installation video for in-the-wall
products, visit our website at www.wgwoodproducts.com