ASSEMBLY STEP STEP 1 A ==4 PCS STEP 2 Insert cam bolts Dino panel 7.
ASSEMBLY STEP STEP Use screws B to attach metal glides G to panels Please make sure metal glides are placed in the right direction as shown. STEP Fix side panels 5,6 with bottom 7. The sides with metal glides on 5,6 shall face interior as shown.
ASSEMBLY STEP STEPS Insert cam bolts D into panel 4. Assemble panel 4 with panels 5& 6. Make sure the side with per-drilled holes on panel 4 facing rear as shown.
ASSEMBLY STEP STEP E & PCS STEPPE Use screws B to attach metal glides F to panels 9 & 10 Please make sure metal glides are placed in the right direction as shown.
ASSEMBLY STEP STEP 11 H © 1PC C @= 1PC Dir »PCS STEPPE Insert cam nuts E into 9, 10 to fix 8 together. The sides with metal glides on 9,10 shall face exterior.