Instructions / Assembly

11
反面
50’
20’
12
Measuring baseball bat swing speed
It’s the best to place the radar in 45 degree of the batter as the attachment
shown and you will get the most accurate reading.(Remember to keep
distance from the batter to avoid hitting the radar)
The radar should face the batter and remember to keep distance with the batter
batter
90°
45°
WIFI
R
EC
MPH
KMH
13
Measuring soccer kicking speed
It is the best to place the radar behind soccer goal and face the player
50’ 20’50’/150M 20’/60M
WIFI
REC
MP
H
KMH
Recommended distance (Gray Area)
15
WIFI
REC
MPH
KMH
10”
45°
Measuring golf swing speed
It is the best to place the radar 10" (25CM) away from the tee
14
Measuring tennis serving speed
It is the best to place the radar behind tennis net and face the player
50’ 20’50’ 20’
Recommended distance (Gray Area)
WI
FI
REC
M
P
H
K
MH
Speed Vision
Instruction Manual
18 16
50’ 20’50’ 20’
Recommended distance (Gray Area)
Measuring hockey shooting speed
It’s the best to place the radar in this metal frame and face the player.So advise
to install a metal frame(Not included) to protect the Speed Vision from being
hitting.
Note: if you want a metal frame, please send email to [e-mail]
W
IFI
R
EC
M
P
H
K
MH
A metal frame
not included
17
Note: if you want a metal frame, please send email to
[e-mail]
Recommended distance (Gray Area)
50’ 20’50’ 20’
A metal frame
not included
WIFI
R
E
C
M
P
H
KM
H
1
Trouble shooting：
Recommendation
1. Please place radar right behind the target area.
2. Please make sure the target is not more than 29-1/2’ away from the
radar to have more accurate readings.
3. Depends on type of sports, it may need to use tripod to get the more
accurate readings
4. Radar has angle adjustment function. It can be adjusted from 72 degree
to 87 degree. Depends on type of sport, please adjust the best angle to
have more accurate readings.
5. There are certain mathematical properties of Doppler Radar that affect
the accuracy of personal sports radar. Please read Cosine effect on target.
As a quick reference to accuracy, remember to keep your targets direction
of travel in a direct line with you and not perpendicular.
Cosine effect on target
The speed radar will measure the relative speed of a target as it
approaches the radar gun. If the target is in a direct line with the radar gun
the measured speed will be exact. As the angle of incidence increase, if
you move either right or left of this direct line, the accuracy will decrease.
The measured speed will decrease as you move off this centerline. The
phenomenon is called the cosine effect.
The United States Federal Communications Commission (in 47 CFR
15.105) has specified that the following notice be brought to the attention
of users of this product.
MODEL: ODIS-170
NAME:
SPEED VISION
INSTRUCTION MANUAL
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio / TV technician for help.
FCC Caution: any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or tranmiter.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between and radiation &your body.
Item # ODIS-170
FCC STATEMENT
74
WIFI
REC
MPH
KPH
LED Display
WIFI
REC
MPH
KPH
3
Product content:
1PC Speed Vision
1PC Wrist Band Remote Controller
1PC Mini Tripod
1PC Carry Bag
1PC 4GB Micro SD Card(inside the card slot)
Features
Radar feature
* Bright LED display: Can be easily seen from a distance
* Speed Range: 3 to 299 MPH (5 to 480 KMH)
* LED indicators: Miles per hour & Kilometer per hour
* Portability: Can be used anywhere
Camera feature (Built-in Speed Vision)
* Image sensor: 2.0 Mega pixels CMOS-sensor
* Lens: 150 degree HD wide-angle lens F/2.5(F=2.5MM)
* Video resolution: 1080P 30FPS 720P 30FPS 720P 60FPS
* Video file format: MOV
* Memory: Micro-SD Max 32G Class4 UP
* Distance: 5m wifi 802.II B/G/N
Wireless wrist band remote control feature
* Length can be adjusted.(See page 4)
* Press easy one-button controller to start recording
* Distance: 18m 2.4G wireless remote control
* ISmart DV App: transforms your phone or tablet into a live video
* CR1632 Lithium Manganese Dioxide battery included
Double adjustable angle feature
* Speed Vision Support Stand: can be adjusted from 72 degree to 90 degree
(see page 6). Based on different sports, you can adjust angles to get more
accurate readings.
* Mini Tripod: adjustable to increase accuracy (See page 6) .
6
CHART #1 CHART #2
CHART #3 CHART #4
CHART #5 CHART #6
WIFI
REC
MPH
KPH
WIFI
REC
MPH
KMH
95
1. ON/OFF---Press “ON/OFF” button to turn on or turn off the Speed Vision.
If on,the MPH light is on.
2. STILL/MOVE---See page 5
3. MPH/KPH---Press ”KMH or MPH” button to choose which measurement
you prefer. The LED light will indicate the one which has been chosen
4. REC---Press “REC” button to start recording video
5. WIFI---Press “WIFI” button to activate WIFI function
6. VIDEO MODE---Hold the VIDEO MODE button for 3 seconds to turn on
the camera and the REC light is on.
7. BATTERY---See page 5
8. SUPPORT STAND--- Adjustable from 72 degree to 90 degree. Based
on different sports, you can adjust angles to have more accurate readings
9. MICRO SD CARD SLOT ---4GB capacity SD card included
8
Safe battery usage
Use alkaline batteries for best performance and longer life.
Use only the type battery recommended for the unit.
Batteries should be replaced only by an adult.
Insert batteries with the correct polarity (+ and -).
Do not mix old and new batteries.Do not mix alkaline , standard(carbon-zinc),
or rechargeable (nickel-cadmium) batteries.
Do not short-circuit batteries.
When not used for an extended time, remove batteries to prevent possible
leakage and damage to the unit.
Do not mix rechargeable and non-rechargeable batteries.
Rechargeable batteries are to be removed from the toy before charging.
Rechargeable batteries are to be recharged only under adult supervision.
Do not recharge non-rechargeable batteries.
Exhausted batteries are to be removed from the toy.
Do not dispose of batteries in fire as they may leak or explode.
The Speed Vision operates on 5 AA batteries. To install, please open the
cover on the back of the unit. After placing the batteries, put the cover back.
When battery power is low, the screen will show "Lo" and repeat in every
30 seconds until you replace with new ones.
Automatic battery saver:
Camera will shut down after 3 minutes of inactivity.
Wifi will shut down after 1 minute without connecting to smart phone.
Radar will shut down after 5 minutes of inactivity.
2
Do you know how fast you really are? What action
you have? Speed Vision can tell you.
* Speed Vision can not only accurately measure your delivery speed but also
record your action.
* Measure your performance in most sports such as baseball, cricket, hockey,
tennis, squash, soccer, football, handball, running, skating and many more.
* Capture your great moment in time to preserve your treasured memory of
sports achievements.
* Built-in WiFi for convenient download video to smart phone, save and share
at anytime and anywhere.
* 1080P video resolution .
* 150 Degree view.
* Easy one-button wrist band remote controller allows Speed Vision to be
used by one person.
* When speed data is shown on the display, the camera will automatically stop
recording after 5 seconds.
* Easy accessible by using the free ISmartDV App.
* Lightweight and easy to use. Unlike most of radar guns, it does not require
other person to hold it and point on the target.
* Measure up to 299mph (480kph).
* Support stand allows it to be placed on any flat safe surface.
* Bright LED display to be read from a distance.
* Battery type: 5 AA batteries (not included).
Note: Operating Temperature Range: 32 – 104F / 0 – 40°C
10
50’ 20’
pitcher
ball direction
6-1/2’
Speed radar(position A)catcher
(Place on the ground)
W
I
F
I
R
E
C
M
P
H
K
M
H
MEASURE SPEED and RECORD ACTION for multi sports
1.Measuring baseball pitch/throw speeds
2.Measuring baseball bat swing speed
3.Measuring soccer kicking speed
4.Measuring tennis serving speed
5.Measuring golf swing speed
6.Measuring hockey shooting speed
7.Measuring lacrosse shooting speed
Note: We suggest to connect your smart phone with camera to check
whether your body/gestures can be seen in the camera/video(see page
The Speed Vision can be used as a radar gun or camera separately.
ON/OFF, MPH/KPH,STILL/MOVE buttons are for radar gun use. VIDEO
MODE, WIFI, REC buttons are for camera use.
200MM
101MM
折痕线
正面
6
5
4
3
2
1
This device co mplies
with Part 15 o f the FCC
Rules. Operation is
subject to the following
two conditions:
(1) this device may not
cause harmful
interference, and
(2) this device must
accept any interfer ence
received, including
interference that may
cause undesired
operation.
Model: ODIS-17
0
7
8
9
IC:11871A-76987981228
1.Baseball pitch
2.Baseball swing
3.Fast pitch
4.Fast pitch swing
5.Tennis swing
1.Ice hockey shooting
2.Lacross shooting
3.Soccer kicking
4.Golf swing
When screen shows F0, it is in "Still Mode". When screen shows F1, it is
in "Move Mode".
Move mode:
Wireless wrist band for remote control
Wrist band indicator
Adjustable length of wrist band
If needed, please open the
cover on the back to change
new CR1632 lithium manganese
dioxide battery.
It’s the best to place the Speed Vision in front of the pitch net and face
the pitcher.
Recommended pitch distance (Gray Area)
pitcher
Pitching net
(optional)
ball direction
WIFI
RE
C
MP
H
KMH
50’ 20’
Speed radar with tripod (position B)
(tripod’s height base on the strike zone)
(tripod optional)
pitcher
ball direction
catcher
WIFI
RE
C
MP
H
KMH
Single person use
Easy one-button controller used for starting or
ending up the camera recording.Can be operated
by single person.
Still and move mode stands for different movement detection,choose the
correct mode to suit your sports
How to select your mode
Still mode:
Battery installation
How to assemble the tripod
Measuring baseball pitch / throw speeds
2 persons use
1. Position A: It’s the best to place the radar 6.5’ in front of the catcher to get
the most accurate reading; Place radar facing the pitcher.
Recommended pitch distance (Gray Area)
Measuring baseball pitch / throw speeds
2. Position B: Place the radar beside the catcher and face the pitcher. (Please
note due to the cosine effect, the reading of position B will be 1-2mph different
with the reading of position A)
2 persons use
Recommended pitch distance (Gray Area)
It’s the best to place the radar in this metal frame and face the player. So advise
to install a metal frame(Not included) to protect the Speed Vision from being hitting.
Measuring lacrosse shooting speed
Problems :
No speeds displayed
Possible Causes / Solutions:
Is the unit turned ON (indicated by a flashing
unit’s indicator lamp)?
Are there any external interference sources
nearby (see below)?
Is the ball passing directly at, over from the
unit; and is the object traveling at least within
6 ft. (2m) from the front face of the unit?
Is the unit blocked and/or covered?
For example, if the unit is
positioned behind a hockey or soccer net,
a person playing goalie will block the signal.
Is the unit correctly aimed?
If the speed data is less than 30KPH when
recording, no speeds displayed and the
camera won’t stop recording.
If using batteries (“A A”), is each one of the four
batteries inserted correctly?
Erratic or “ghost”
readings (digits flash on
their own)
Batteries run down too
quickly
Unit displays “LO”
Rain, snow or heavy moisture in the air
may cause interference.
Your batteries are low on power—replace
them immediately.
The following are possible sources of
interference that, if in proximity your unit,
may affect readings: Electric fans, large
powerlines, fluorescent lights, other
transmitting devices, 2-way radios, or other
RF transmittingdevices
Inconsistent readings can also result from
altering the positioning (angle and
distance from target) of the unit—see
earlier section on “ Angle Error”.
Use higher quality Alkaline batteries
Can’t use your wrist
band to start recording
Is the VIDEO MODE on?
Has the MicroSD Card been inserted in
Speed Vision?
Download video errors
exceeded Memory
capacity
Recommend to download videos by Wifi
less than 4pcs/50MB at a time. If more than
4pcs/50MB, we suggest taking out the
MicroSD card, inserting into your computer,
tablet or smart phone to retrieve .
Changed to a new MicroSD card with
enough space.
Is the distance between Speed Vision and
smart phone exceed 5 meters.
Wifi doesn’t work:
Did you input the WiFi password for the
first time?
Is your wrist band out of battery?
Is your Speed Vision out of battery?
Is your smart phone out of battery?
Delete the video via your smart phone to
save your MicroSD Card space or take it
out and clear up via inserting into your
computer , tablet or smart phone etc.
The built-in Wifi can only connect with 1
mobile or tablet at a time, please make
sure the Smart Vision is not connected with
other devices.
Is the WiFi button off since your smart
phoneand wrist band can not be used
at the same time
The “ON/OFF” button on Speed Vision
has been switched on.
To use radar only
To use radar and record
To use WIFI and mobile device to record live action
To retrieve the video
1. Push the on/off button. The MPH light is on. The unit is ready.
To retrieve the video through WIFI
To free up storage space on your micro SD card
To free up storage space on your micro SD card
through your mobile device
2
2
CHOKING HAZARD -- This item contains small parts. Not suitable
for children under 3 years old.
Do not recommand to use Speed Vision in rain, wind or snow weather
Warning:
Before actually using the unit, download the iSmart DV APP on your mobile
devices. This allows you to download and share the video through your
mobile device. iSmart DV APP is available in Apple Store and Google Play.
1. Push the on/off button. The MPH light is on
2. Push the Video Mode button and hold until REC light comes up.
3. Push the record button on the unit and the record light will start flashing.
The unit is ready. You can also use bracelet to record
3A. Use Bracelet to record
3A-1 Push the button and the record light will start flashing. The unit is
ready
1. Push the on/off button. The MPH light is on
2. Push the Video Mode button and hold until REC light comes up.
3. Push the WIFI button and WIFI light will start flashing
4. Your mobile device needs to be WIFI enable
5. With WIFI enabled, connect your mobile device to Wificam_000 in WiFi
settings using the code ‘1234567890’
6. Opening the iSmart DV App, click on Wificam_000 to complete the
connection
7. When connecting is made, you will be in Camera mode of App.
To get to video mode, press the symbol “ ” on the buttom right
and you will see the record button
8. Push the record button to start recording. Note you will see the record
light flashing
9. After unit register speed, the recording will stop and flashing light
will stop
10. To record again, press record button again and you will see the
record light flashing. Your unit is ready for next recording.
This process continues until you have done.
1. Turn the unit off
2. Your micro SD card is located on top of unit. Open the small door
and push down the micro SD card. The card will pop up and remove
3. Insert micro SD card in the computer and download your video
4. Don’t forget to put the micro SD card back into the unit
1. Push the on/off button. The MPH light is on
2. Push the Video Mode button and hold until REC light comes up
3. Push the WIFI button and WIFI light will start flashing
4. Your mobile device needs to be WIFI enable
5. With WIFI enabled, connect your mobile device to Wificam_000 in WiFi
settings using the code ‘1234567890’
6. Opening the iSmart DV App, click on Wificam_000 to complete
the connection
7. Press the symbol “ ” on the button left corner. Now you have
connected your mobile device to the micro SD card located in the unit
8. You will have your choice of selecting photo or video. Now select
9. You just select the Video Tap. Now, you need to click the select button
on the tip right corner to select the video you want to dlownload
10. You select the video. Now click the symbol “ ” on the button right
corner to download
11. You will see the “confirm” or “cancel” button comes up. If you want to
download the video, push the confirm button
12. After the video has been downloaded, the Activities Manual
will come up and you choose to e-mail, message, twitter, factbook, etc…
1. Turn the unit off
2. Your micro SD card is located on top of unit. Open the small door
and push down the micro SD card. The card will pop up and remove
3. Insert micro SD card in the computer and delete your video
4. Don’t forget to put the micro SD card back into the unit
1. Push the on/off button. The MPH light is on
2. Push the Video Mode button and hold until REC light comes up
3. Push the WIFI button and WIFI light will start flashing
4. Your mobile device needs to be WIFI enable
5. With WIFI enabled, connect your mobile device to Wificam_000 in WiFi
settings using the code ‘1234567890’
6. Opening the iSmart DV App, click on Wificam_000 to complete the
connection
7. Press the symbol “ ” on the button left corner. Now you have
connected your mobile device to the micro SD card located in the unit
8. You will have your choice of selecting photo or video. Now select
9. You just select the Video Tap. Now, you need to click the select button
on the tip right corner to select the video you want to dlownload
10. You select the video. Now click the symbol “ ” on the button left
corner to delete
11. You will see the “confirm” or “cancel button comes up. If you want to
delete the video, push the confirm button
Operation Instruction: https://youtu.be/rIz4s_UXnPo