Owner's Manual
4. Connect to the OS-440 Wi-Fi Direct network using the password: hello123
5. Open and use the MSE OS-App to play and control the OS-440.
Section 3: How to Connect a Hardwired Device to Your OS-440
1. Physically plug in your source device using either the RCA (analog) or Optical (digital) input ports.
2. Press the source select button to light the appropriate input you are using; analog or optical.
3. Refer to your input device’s instruction manual for playback functionality.
Section 4: How to Configure Your OS-440 on Wi-Fi Direct
1. Go to the Apple App Store or Google Play store and download the amplier control application “MSE OS-App”.
2. To congure your OS-440 in Wi-Fi Direct, quickly press the source button on your OS-440 twice to change Wi-Fi modes.
This will take a few moments.
Note: The Source Wi-Fi LED will change to yellow while the device is changing to Wi-Fi Direct mode. The Source Wi-Fi
LED will change to purple to indicate that the OS-440 is now in Wi-Fi Direct mode.
3. On your mobile device, select the Wi-Fi signal being broadcast by the OS-440. It will be named “MSE_AUDIO_OS440”.
Additional Notes
1. If this unit is used outdoors, then a GFCI or other plug safety should be used.
2. Additional silicone sealant is suggested to secure the water resistant seal.
Rockustics
®
by MSE Audio
®
| 8005 W 110th St. Suite 208 | Overland Park, KS 66210
913-663-5600 or 855-663-5600 | www.Rockustics.com