Specification

Federal Trade Commission
Fact Sheet
This Is Cellulose
Loose-Fill Insulation
PREMIUM CELLULOSE INSULATION
GREEN Since 1949
26 lb. bag
Read this before you buy - What you should know about R-values:
The chart shows the R-value of this insulation. R means resistance to heat ow. The higher the R-value, the
greater the insulating power. Compare insulation R-values before you buy.
There are other factors to consider. The amount of insulation you need depends mainly on the climate you
live in. Also, your fuel savings from insulation will depend upon the climate, the type and size of your house,
the amount of insulation already in your house, and your fuel use patterns and family size. If you buy too
much insulation, it will cost you more than what you’ll save on fuel.
To get the marked R-value, it is essential that this insulation is installed properly.
Manufactured by: Nu-Wool Co., Inc.
2472 Port Sheldon St. • Jenison, MI 49428
616.669.0100 • 800.748.0128 • Fax: [phone]
nuwool.com
05/2016
R-value at
75°F mean
temp
R-vaores en la
temp. apropiada
de 75°F
Minimum thickness
(in inches)
Grueso mínimo (en pulgadas)
Maximum Net Coverage
(no adjustment for framing)
Cobertura neta máxima
(ningún ajuste para enmarcar)
Gross Coverage
(based on 2” x 6” framing
on 16” centers)
Cobertura gruesa baseda en 2” x 6”
que emarcan el centros del 16”)
To obtain a
thermal
resistance
(R) of
Para obtener
una resistencia
termal (R) de
Installed
insulation
should not
be less than
El aislamiento
instalado no debe
ser menos que
Thickness
after
settling
Grueso después
de colocar
Maximum
sq. ft.
per bag
Pies cuadrados
máximos por boisa
Minimum
bags per
1000 sq. ft
Bolsas
mínimas por
1000 pies
cuadrados
Minimum
weight per
sq. ft. (lbs)
Peso
mínimo
por 1000 pies
cuadrados (lbs)
Maximum
sq. ft.
per bag
Pies cuadrados
máximos
por bolsa
Minimum
bags per
1000 sq. ft
Bolsas
mínimas por
1000 pies
cuadrados
60 18.27 16.44 14.3 70.0 1.75 14.8 67.8
49 15.01 13.51 17.7 56.5 1.41 18.4 54.3
19 6.16 5.55 50.5 19.8 0.50 55.7 18.0
13 4.42 3.98 79.4 12.6 0.32 87.6 11.4
Maximum coverage
sq. ft. per bag
Pies cuadrados máximos
de la cobertura por bolsa
Maximum coverage
per 1000 sq. ft.
Cobertura máxima por
1000 pies cuadrados
Maximum
sq. ft. per bag
Pies cuadrados máximos
de la cobertura por bolsa
Thickness
(in inches)
Grueso
(en pulgadas)
16" oc 24" oc
13
20
2 x 4 x 96 3.5 0.96 28.66 27.71 34.89 36.09
2 x 6 x 96 5.5 1.51 18.24 17.63 54.83 56.72
20
16" oc 24" oc
12.35 11.12 22.0 45.4 1.14 23.1 43.3
38 11.76 10.58 23.3 43.0 1.08 24.5 40.9
32 9.99 8.99 28.1 35.6 0.89 29.8 33.6
30 9.40 8.46 30.1 33.2 0.83 32.1 31.2
40
22 7.04 6.34 42.7 23.4 0.59 46.4 21.5
Pneumatic Application Coverage Chart Carta Neumática De la Cobertura Del Uso
Wall Coverage Chart (3.3 pcf Density) Gráfico de Cobertura pared (3.3 Densidad PCF)
R-value at
75°F mean
temp
R-vaores en la
temp. apropiada
de 75°F
Nominal
Dimensions
Las dimensiones
nominales
Minimum
weight per
sq. ft. (lbs)
Peso
mínimo
por 1000 pies
cuadrados (lbs)
NU-WOOL APPLICATION CHART
Coverage is based on settled density, except for sidewall application. Initial installed thickness information was derived using a Krendl
K500 blowing machine at 5 for the gate (material) setting and 6.5 for the air setting. Use this chart for estimating purposes only.
Application techniques, equipment, equipment settings, atmospheric conditions and hose length all aect the coverage of this product.
Coverage chart based on nominal bag weight of 25 lbs / 11.34 kg. Minimum net weight 23 lbs / 10.43 kg.