Instructions / Assembly

M
Lay the BACK into position, with tabs going into slots in
shelf. Holes should line upwith holes in top!! Fasten
back with (4) BLACK SCREWS.
Note the Double-faced Tape on the bottom ends of the
SIDES.
DETAIL M
SCALE 1 : 4
Remove "Half-moon" to
allow wire through trough.
Wire trough- covered by
Wire Guide
wire
Double-faced tape
Double-faced tape
QTY DESCRIPTION
(2) SIDE (NON HANDED)
(1) BACK PANEL
(1) SHELF
QTY DESCRIPTION
(1) TOP
(4) WIRE GUIDE
(Already assembled to Legs)
HARDWARE BAG:
(20) BLACK SCREW (#10-24 X 1/2)
PARTS LIST
R05144 09/09/09