Instructions / Assembly

DOOR
OVERSHELF
Place the DOOR(s) on to the top of the
Overshelf, with the locks facing forward, and the
SLIDE HINGES touching the front face of the
Overshelf, as shown. Line up the slots in the
SLIDE HINGES with the holes in the front of the
Overshelf.
Find the eight screws in the Hardware Bag (you
will only need four of them with the 48" door).
Screw the DOORS to the Overshelf, as shown.
Before tightening them all the way, position the
DOORS evenly. (The DOOR(s) will overlap the
sides slightly!).
Now tighten the screws.
FLIPPER DOOR
ASSEMBLY
Make sure that the slots in the
SLIDE HINGE are centered on
the holes in the Open Shelf.
Use the slots for adjustment
after both doors are on (60"
and 72" only)
BLACK SCREWS
SLIDE HINGE
DOOR
Overshelf
The flipper doors are now
ready for use.
DESCRIPTION PART #
DOOR 48" (qty = 1) MG772885
60" (qty = 2) MG772886
72" (qty = 2) MG772887
HARDWARE BAG:
(8) BLACK SCREW (#10-24 X 1/2) F09542
PARTS LIST
R05105 12/06/06
Before assembly, make sure that
you have everything you need-
check your parts against the parts
list at the bottom of the page. If
you are missing anything, please
call us at 1-800-621-8846.