Instructions / Assembly

A
SHOULDER
SCREWS
Pedestal holes
are toward front
RIGHT side
LEFT side (remember- the
top is upside-down, so left
and right are reversed!
This instruction sheet shows a
"RIGHT-HAND" return assembly.
For a "LEFT HAND" assembly,
screw the shoulder screws into the
left side.
DETAIL A
SCALE 1 : 4
Place the TOP on a smooth flat surface, face down. Make
sure nothing is underneath to scratch the top!
A carpet is best, but you can also use the carton that the
desk came in.
IF YOU WANT THE RETURN TO BE ON THE LEFT SIDE
OF THE DESK, INSERT THE SHOULDER SCREWS IN
THE LEFT SIDE (SEE NOTE!) IF ON THE RIGHT, THEN
INSERT THEM INTO THE RIGHT SIDE. Insert (2)
SHOULDER SCREWS into two of the (4) inserts in the TOP.
Hand tighten only!
ASSEMBLY INSTRUCTIONS-
RETURN
SHOULDER
SCREW
INSERT
First: Place keyhole in leg over Shoulder Screw. (See Detail)
NOTE- the holes in the leg should be toward the inside of the
return.
Slide leg forward until holes line up. Fix leg in place using (2)
SILVER SCREWS per leg. (See Detail).
Yes, the leg will feel loose until the back is installed.
Double Fold
BACK PANEL
If you want to attach a RETURN to a DOUBLE-PEDESTAL
DESK, you can attach one of the PEDESTALS to the RETURN.
(See DESK instructions for assembly details).
SILVER
SCREW
SILVER
SCREW
BLACK
SCREW
Attach BACK PANEL to LEG using (2) BLACK SCREWS. Attach to TOP using
(2)SILVER SCREWS. Make sure Double fold on the BACK is away from the
top.
The BACK will hang over the edge of the TOP.
Before assembly, make sure that you have
everything you need- check your parts against
the parts list on the last page. If you are missing
anything, please call us at 1-800-621-8846.