Instructions / Assembly

When mounting 30" deep
returns, move the modesty
panels to the rear set of holes
in the return leg. This will allow
the modesty panel to line up
with the shared legs.
Corner
Desk
Left-hand Return
(attached)
Right-hand Return
NOTE: When assembling the returns to the Corner Desk, remove
and discard the adapters that come with the returns. The adapters
are only used to fasten a return to a regular desk.
Use the SILVER SCREWS to fasten the steel parts into the drilled holes in the top.
Use MACHINE SCREWS to fasten the steel parts into the threaded inserts in the top.
Use BLACK SCREWS to fasten the steel parts to each other.
PARTS LIST
QTY DESCRIPTION PART #
(1) TOP (WORKSURFACE)
(2) SHARED LEG 914697
(1) CORNER LEG 914689
(2) BACK (MODESTY) PANEL 914712 (36w)
914713 (42w)
(1) WIRE COVER 630719
HARDWARE BAG:
(13) SILVER SCREW (#10 X 3/4) F02886
(8) MACHINE SCREW (1/4-20) F03736
(8) BLACK SCREW (#10-24 X 1/2) F09542
R05126 02/15/09