Instructions / Assembly

hts reserved.
2: INSTALLING THE BACKSPLASH
1.
2.
3.
4.
If the floor is uneven, causing the vanity (A) to wobble, determine which
foot needs to be adjusted in height.
Carefully lt the vanity (A) either backwards or forwards to access the leg
leveler. Turn the leveler clockwise to make the leg shorter, or
counterclockwise to make it longer.
Repeat as needed with the other feet unl the vanity stands solidly on the
floor.
1: ADJUSTING THE LEG LEVELERS
1.
2.
3.
CAUTION
Two people are needed to safely lt the vanity and access the leg levelers.
3: REMOVING THE DRAWER
1.
2.
3.
Fully extend the drawer.
Pull the two latches outward on the underside of the drawer to release
the lock.
Simultaneously lt and li the drawer upwards to pull it out of the
vanity (A).
Wipe off the area of the top (A) where the backsplash (B) will sit using
a clean rag.
Apply a line of silicone onto the top (A) along the back edge.
Align the backsplash (B) with the back edge. Slowly lower it onto the
top (A) and gently press to adhere.
Wipe away any seeping silicone from underneath the backsplash (B)
with a clean rag.
B
A
OPTIONAL
OPTIONAL
Contact Belle Forêt at [phone]. Copyright ©2015, World Imports Decorave Plumbing. All rights reserved.
PAGE 3
INSTALLATION INSTRUCTIONS
PARKAIRE VANITY COMBO
A