TDS

ManualsBrandsUnbranded ManualsPaintPrep-n-Profile 1 Gal. Concrete Cleaner, Degreaser and Acid Etching Compound cleans and Etches in One Application

VHI Training Manual Prep-N-Profile-Tech Data VanHearron.com 479-255-6101

Prep-N-Profile

Revolutionary Safe Acid Surface Preparation

BENEFITS

• Significantly improves adhesion of coatings and repair materials

• Non-flammable

• Low odor

• VOC compliant (ZERO VOC)

• Use prior to repairing, or applications involving

sealing or staining concrete, paver or

masonry surfaces

__________________________________________________________________________________________

Product Description:

Prep-N-Profile is specifically designed to prepare new

or existing concrete, and most cementious substrates,

for the application of paints, coatings, mortars, and

adhesives. Prep-N-Profile is different from other prep

products because of its patented surfactant which

cleans and degreases the surface and in the same

application, creates an adequate 2-4 mil profile for

paints, coatings, thin sets, self-leveling mixtures,

adhesives and other topical applications requiring a

surface profile.

Characteristics:

Waterborne mixture of revolutionary safe acids and

proprietary surfactants.

Usage:

Heavy duty product effective on new or existing

concrete, and most cementious substrates including

thin sets and self-leveling mixtures.

Technical Data:

Physical State Liquid

Odor Slightly acrid

pH 1.0

Density 1.14 g/cc

Solubility in Water Complete

VOC 0 g/l

Before Using:

Read entire label, tech data and MSDS. Use in well

ventilated area. Avoid breathing of vapor or spray mist.

Keep container closed when not in use. In case of

FIRE, extinguish with foam, CO

, dry chemical, water

fog or spray. Do not reuse container.

Protective Equipment:

Long sleeves and gloves should be worn during

application. Where spray back is possible, eye

protection should be worn. Use respiratory protection

in accordance with OSHA Standards and Local Codes.

Spills and Disposal:

Large spill: Dike and contain for intended use. Small

spill: Soak up with an absorbent and place in approved

container for disposal. Check state, local, or federal

regulations for your area for waste disposal. Check for

adequate ventilation to maintain PEL.

First Aid:

Do not get in eyes, on skin or clothing. Wash clothing before

re-use. In case of contact: For eyes, immediately flush with

water for 15 minutes. Call a physician. For skin, flush with

soap and water. Wash clothes before reuse. If inhaled,

remove to fresh air. Call a physician. If swallowed, drink

water, do not induce vomiting, and call a physician

immediately. For additional information, consult the MSDS for

this product.

Coverage Rates:

Generally, one gallon of material will treat 100-200 sq. ft. per

application. Coverage rates will vary depending on surface

soiling, porosity, density, and depth of profile desired.

Preparation:

Do not allow to dry on the surface. Protect all adjacent

surfaces from overspray. Thoroughly rinse product from

surrounding vegetation. Although the solution should self

neutralize when used as directed, it is recommended that a

pH test be performed before rinsing to soil or sanitary drains.

ALWAYS TEST, in an inconspicuous area, to determine the

suitability of the product for the intended use.

Application:

Read entire label before using. Use only as directed. Before

applying, it is recommended that preliminary tests be carried

out to determine usage and to test the effectiveness of the

treatment. Apply solution liberally on surface to be prepped

with a low pressure garden style pump sprayer, or a plastic

sprinkling can. Use a stiff bristled brush (nylon deck brushes

are suggested) to lightly spread product evenly over the

surface, and allow solution to dwell for 5 minutes. After 5

minutes, agitate the surface with the stiff bristled brush in a

back and forth motion going north to south and then east to

west to assure complete surface agitation. Allow the agitated

solution to dwell on the surface an additional 5-8 minutes and

rinse thoroughly. Allow surface to completely dry before

analyzing results. Repeat process as needed. DO NOT

ALLOW SOLUTION TO DRY ON THE SURFACE! Repeat

application process as needed to reach desired results.

Clean tools, equipment with fresh water. Water flush all

primary surfaces, shrubbery, sidewalks, blacktop, asphalt,

glass, equipment and all adjacent surfaces.

Summary of content (2 pages)

PAGE 1
Prep-N-Profile Revolutionary Safe Acid Surface Preparation BENEFITS • • • • • Significantly improves adhesion of coatings and repair materials Non-flammable Low odor VOC compliant (ZERO VOC) Use prior to repairing, or applications involving sealing or staining concrete, paver or masonry surfaces __________________________________________________________________________________________ Product Description: Prep-N-Profile is specifically designed to prepare new or existing concrete, and most cementious subs
PAGE 2
Limitations: Do not allow solution to dry on the surface. Do not use on polished marble. Do not use on any metal surface. Always test prior to use. Storage and Stability: Prep-N-Profile has a shelf life of at least 12 months at temperature between 0 C and 30 C. Protect the containers against light. After 12 months from the product purchase date, testing is required to verify the product is still active. Do not allow product to freeze. Freezing could decrease shelf life substantially.