Specification

POE2000
Connector Interface
2X RJ45 (PSE & PD Test Jacks)
Voltage Range
Standard PoE: 36 to 60V; Non-Standard: 11 to 60V
Max Current (based on 50V)
990mA/50W per mode; Total 2A/100W
Function Selection Mode
T Mode: for detecting PSE status
N Mode: for determining non-standard PoE + inline testing
I Mode: for testing & monitoring real-time power status
Display
4 LEDs indicate IEEE802.3af or 802.3at/bt standard
Dual 7-digit LEDs indicate power source either end (A) Span (1/2, 3/6) or Mid
(B) span (4/5, 7/8) or both for bt
2 Yellow LEDs indicate reversed polarity for power type
Display alternates between Voltage, Current and Power
Step Button
For selecting specific data to display
Power
Uses system power when connected to a device
Dimensions/Weight
3.9 x 1.4 x 1” (99 x 36 x 26mm)/1.6oz (45.4g)
POE2000 PoE Tester Pro
The POE2000 helps to speed up the installation and troubleshooting of PoE
system devices
Features:
• 4 LEDs indicate IEEE802.3af or 802.3at/bt standard
• Detects PSE-type/class, power source, polarity, voltage, current,
power, and whether it is End Span, Midspan, or across all 4 pairs
• Determines standard PoE or non-standard passive PoE
• 2 Yellow LEDs indicate reversed polarity for power type
• Inline Power Level Monitoring alternately displays Voltage,
Current and Power and incorporates a step button for selecting
specific data
Applications:
• This tester helps to speed up the installation and
troubleshooting of PoE system devices
• If you are a VoIP phone and IP camera installer, you will
know if there is power and a data pair available for your
equipment
Ordering Information:
POE2000 POE Tester Pro