User manual

PoKeys user manual

www.poscope.com

7. Installation

PoKeys55 and PoKeys56U are USB 1.1/2.0 compliant devices and as such require no additional

drivers for operation as a standard USB keyboard and joystick.

PoKeys56E/57E is an Ethernet device that requires an Ethernet connection between host computer

and the device and the external power supply. No additional drivers are required. Network firewalls

must allow all traffic on TCP/UDP port 20055.

To operate the device after the device has been configured there is no software installation

necessary on a target system.

To configure the device the supplied software must be installed and the requirements listed in

previous section of this manual must be met.