Use and Care Manual

Outside Closure: Used between

roofing steel and ridge caps or

endwall flashing.

Also Available: Vented Closures

Located under ridge cap, foam

closures will economically vent

trapped air and condensation which

deteriorates metal, while keeping out

rain, snow and insects - yet allowing

fresh air circulation!

Note: All closure strips are

3’ long and have adhesive attached.

Inside Closure: Used on top of

fascia boards on enclosed

sidewall overhangs. Above eave

girt with no sidewall overhangs.

CLOSURES

VENTED RIDGE

Combined with enclosed vented overhangs provides proper ventilation for animals and

heated structures. A requirement for dead attic spaces.

COMMERCIAL WALL GIRTS

Girts are 2’ o.c. (on center) Creates a minimum 6” insulation cavity drywall ready