User Manual

Start ESC with Full Throttle to enter full
programming wait for multiple beeps and
musical two-tone then throttle to idle
Initial Beeps when
started with full throttle
and after throttle to idle
First Secondary Beeps after throttle set
to full to select mode wait for
confirmation and then to idle
Secondary Beeps after beeps that indicated
the currently selected mode. Once the
number of beeps is reached set to full
throttle to select that option
Confirmation
♪ 1 secondary beep = No Brake
♪♪ 2 secondary beeps = Brake
♪ 1 secondary beep = NiMH
♪♪ 2 secondary beeps = Lipo
♪
1 secondary beep = 30 Degrees
♪♪
2 secondary beeps = 24 Degrees
♪♪♪ 3 secondary beeps = 18 Degrees
♪♪♪♪ 4 secondary beeps = 6 Degrees
♪♪♪♪♪ 5 secondary beeps = 0 Degrees
♪♪♪♪♪♪ 6 secondary beeps = Auto Timing
♪ 1 secondary beep = 8KHz
♪♪ 2 secondary beeps = 9KHz
♪♪♪ 3 secondary beeps = 10KHz
♪♪♪♪ 4 secondary beeps = 11KHz
♪♪♪♪♪ 5 secondary beeps = 12KHz
♪♪♪♪♪♪ 6 secondary beeps = 13KHz
♪♪♪♪♪♪♪ 7 secondary beeps = 14KHz
♪♪♪♪♪♪♪♪ 8 secondary beeps = 15KHz
♪♪♪♪♪♪♪♪♪ 9 secondary beeps = 16KHz
First secondary beeps indicate what
mode is currently selected
♪ 1 secondary beep = Governor OFF
First secondary beeps indicate what
mode is currently selected
♪♪ 2 secondary beeps = Governor ON
Wait for musical
tone for
confirmation
Wait for musical
tone for
confirmation
Wait for musical
tone for
confirmation
Wait for musical
tone for
confirmation
Wait for musical
tone for
confirmation
YEP ESC Full Programming Guide Chart
Program the Governor mode
5 initial beeps (♪♪♪♪♪)
First secondary beeps indicate what
mode is currently selected
First secondary beeps indicate what
mode is currently selected
First secondary beeps indicate what
mode is currently selected
First secondary beeps indicate what
mode is currently selected
3 initial beeps (♪♪♪)
Program the Timing
Program the PWM Frequency
4 initial beeps (♪♪♪♪)
1 initial beep (♪)
Program the brake
2 initial beeps (♪♪)
Program the Battery type