PURE SINE WAVE INVERTER USER MANUAL PS1007 PS1008 PS1009 PS2001 IMPORTANT SAFETY INFORMATION. SAVE THESE INSTRUCTIONS. TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING THE OPERATION AND INSTALLATION OF PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE. WWW.GOWISEPOWER.
THANK YOU FOR YOUR PURCHASE! UNPACKING & INSPECTION Thoroughly inspect the products. The package should contain the following: 1. Inverter 2. + (Red) and - (Black) DC Terminal Covers 3. Remote 4. 15 Ft. Cable 5. Mounting Screws 6. User Manual Contact Our Customer Care Team 855-233-9199 support@gowiseusa.com Live Chat at gowisepower.
TABLE OF CONTENTS Unpacking & Inspection......................... 2 Introduction.............................................. 4 Standard Features........................ 4 Protection Features....................... 5 Remote......................................... 6 Safety Instructions................................. 7 General Safety Instructions............ 7 Battery Precautions....................... 8 DC Connection Precautions .......... 8 Personal Safety Precautions .........
INTRODUCTION GoWISE Power Pure Sine Wave Inverters address the trend of having the convenience of household power on RVs for refrigeration, microwave, toast oven, airfryer, coffee maker, entertainment systems and more, with low THD <3%. GoWISE Power Inverters converts 12 VDC to 110 VAC household power, unique in design. • This unit uses the latest in soft start technology. The output voltage gradually increases to the normal value from low value after the inverter is turned on.
INTRODUCTION GoWISE Power Pure Sine Wave Inverters are protected by a variety of features including: Reverse Polarity Protection The fuses will burn out when the positive and negative cables are reverse connected to protect the inverter. Low Battery Shutdown When the inverter is in low voltage, an alarm will go off first and if the voltage continues to reduce, the LCD will turn red and the inverter will shut down. If the voltage rises to 12V +/- 0.
INTRODUCTION GoWISE Power Pure Sine Wave Inverter Remote 1. The Inverter Includes a remote, mounting screws, and 15 Ft. cable. 2. The remote is designed to be mounted on a dash or other flat surface. 3. The remote cable should be plugged into inverter and the remote before being mounted. NOTE: The remote is optional and not required for inverter operation. There is an ON/OFF switch located on the inverter itself. When powering the inverter ON, a normal indicator will be a green LED light.
SAFETY INSTRUCTIONS GENERAL SAFETY INSTRUCTIONS IMPORTANT: READ AND SAVE THESE INSTRUCTIONS! This user manual contains important safety instructions for the GoWISE Power Pure Sine Wave Inverters that must be adhered to during installation, operation and troubleshooting. Read and save this user manual for future reference. Read these instructions carefully and become visually familiar with the equipment before installation, operation, servicing, or maintenance.
SAFETY INSTRUCTIONS BATTERY PRECAUTIONS To reduce risk of battery explosion, follow these instructions and those published by battery manufacturer and manufacturer of any unit you intend to use in vicinity of battery. Review cautionary marking on these products and on engine. SPARK - Be very cautious about dropping metal objects such as screwdrivers and wrenches onto a battery. This could short-circuit the battery and immediately cause a spark that may result in a fire or explosion.
SAFETY INSTRUCTIONS PERSONAL SAFETY PRECAUTIONS (cont.) WARNING: Restrictions on Use - The Power Inverter shall not be used in connection with life support systems or other medical equipment devices. DANGER • HIGH VOLTAGE AVOID SERIOUS INJURY OR DEATH FROM ELECTRICAL SHOCK. BEFORE PERFORMING ANY ELECTRICAL WORK TURN OFF AC POWER SUPPLY. • EXPLOSION HAZARD AVOID SERIOUS INJURY OR DEATH. MAKE CONNECTIONS IN AN ATMOSPHERE FREE OF EXPLOSIVE FUMES.
GENERAL OVERVIEW PS1007 ON/OFF SWITCH COOLING FAN GROUND LUG TERMINAL AC OUTLETS REMOTE USB POWER INPUT TERMINAL (BLACK) = NEGATIVE POWER INPUT TERMINAL (RED) = POSITIVE PS1008 ON/OFF SWITCH COOLING FAN GROUND LUG TERMINAL AC OUTLETS REMOTE USB POWER INPUT TERMINAL (BLACK) = NEGATIVE POWER INPUT TERMINAL (RED) = POSITIVE PS1009 ON/OFF SWITCH COOLING FAN GROUND LUG TERMINAL AC OUTLETS REMOTE USB POWER INPUT TERMINAL (BLACK) = NEGATIVE POWER INPUT TERMINAL (RED) = POSITIVE PS2001 ON/OF
GENERAL OVERVIEW DISPLAY OVERVIEW 6 3 2 4 5 1 No. Description Details 1 On/Off Button Turn on/off the inverter 2 DC Input 12V Green LED for 12V DC Input 3 Check The symbol illuminates red when the Off inverter is in fault condition. 4 DC Input Level When the input DC voltage is below 11V DC, the first Off LED is lit red. From 11 to 13V DC, the LEDs are lit green and incrementally indicate the battery level.
INSTALLATION PREPARING FOR INSTALLATION WARNING • This device is not ignition protected, risk of fire or explosion. • This equipment contains components that could produce arcs or sparks. To reduce the risk of fire or explosion, DO NOT install this equipment in compartments containing batteries, flammable materials or fumes, or in a location containing gasoline-powered machinery, or joints, fittings, or other connections between components of the fuel system.
INSTALLATION INVERTER UNIT LOCATION NOTE: Please re-read the PERSONAL SAFETY PRECAUTIONS section of this manual (pg. 8-9) prior to installation. This unit must be located in a cool, dry, well ventilated area, free from unsecured hardware. Temperature is also a serious consideration. DO NOT mount this unit in an engine compartment or areas where temperatures will exceed 104°F (40°C). In addition, the following should be considered when choosing a location: 1.
INSTALLATION INSTALLATION GUIDE STOP: BEFORE INSTALLING YOUR INVERTER, READ AND FOLLOW THE CHECKLIST BELOW: • Begin with the power switch and main shore/station power breaker in the OFF position. Ensure that all over current protection (e.g. fuses and/or circuit breakers) are ready for use, not blown or tripped. • Use great care to ensure the polarity of the DC connections are correct or damage will result to your inverter. • Verify all connections are tight, corrosion free and of good integrity.
INSTALLATION INSTALLATION MATERIALS – CABLING Use great care to ensure the polarity of the DC connections are correct or damage will result to your inverter. 1. DC Cables - The DC portion of the power Inverter requires a large amount of amperage in Inverter mode. Cable size and length is of extreme importance and should be well thought out and planned per this manual before beginning installation. Items to consider are as follows: a.
OPERATION Inverter Power On and Off The AC output can be turned on or off by pressing the ON/OFF button on the display panel. With the remote feature, the inverter can be turned on or off remotely as well. GFCI Testing To test the GFCI, start by plugging a load such as a lamp into the outlet. Press the TEST button to shut power off to the load. If the load turns off, then this part of the test is a pass. Next, press the RESET button.
MAINTENANCE BATTERY MAINTENANCE Periodically, check the batteries to make sure they are good condition. Check the terminals for corrosion and clean them with a wire brush if necessary. If the batteries are flooded lead-acid, check the electrolyte levels every month and top off with distilled water if needed. Finally, check the battery voltage in accordance with the manufacturer’s specifications. INVERTER MAINTENANCE Little maintenance is needed to keep the power inverter running properly.
TROUBLESHOOTING WARNING ELECTRICAL SHOCK HAZARD DO NOT disassemble the inverter. It does not contain any serviceable parts and attempting to service the unit could result in an electrical shock or burn. Failure to follow these instructions can result in death or serious injury. How to Troubleshoot Common Fault Conditions This section details how to troubleshoot the power inverter. Follow the process below to narrow down the cause of unit fault conditions.
TROUBLESHOOTING Fault Message Condition Action Battery voltage has fallen below 10.5 V +/- 0.5 V • Check battery voltage and recharge if needed • Check for proper DC cable sizing • Check for loose connections and tighten if needed • Charge batteries to clear fault LOW DC SHUTOFF Battery voltage has fallen below 10.0 V +/- 0.
SPECIFICATIONS Description Input Characteristics Output Characteristics Protection 20 Pure Sine Wave Inverter 1000W 1500W 2000W Input Over-Voltage Protection 15~16.5VDC Input Under-Voltage Protection 9.5~10.5VDC Voltage Range 11~15VDC No Load Current ≤1A @12.5VDC 3000W Continuous Output Power 1000W 1500W 2000W 3000W Surge Power 2000W 3000W 4000W 6000W Effiency MAX.
NOTES 21
WARRANTY GoWISE Power warrants all products against defects in materials and workmanship for one (1) year effective from the date of purchase. GoWISE Power will replace any products that are found to be defective due to manufacturer flaws based on eligibility. Refunds issued by GoWISE Power must be purchased directly from GoWISE Power and are only available to the original purchaser within the first 30 days. We do not issue refunds for items bought by thirdparty retailers.
WARRANTY DEFECTIVE PRODUCTS & RETURNS If your product is defective within the 1-year warranty period, please email our Customer Care Team at support@gowiseusa.com. To expedite your issue, please provide the 4 items below: 1. Copy of the invoice, order information, or gift receipt showing the date of purchase 2. Serial number, usually found on a sticker located on the bottom on back of the unit 3. Picture or video of the issue or defect that you are experiencing 4.
www.gowisepower.com 855-233-9199 support@gowiseusa.com Live Chat at gowisepower.com M-F 8:30am - 4:00pm MST • To ensure the correct use of this unit, read these instructions carefully and thoroughly. • Please keep this manual for future reference. • Thank you for purchasing this GoWISE Power Pure Sine Wave Inverter.
