User manual

UDOO Starting manual (beta) Version 0.3
http://www.udoo.org/
23"
SAM3X8E microcontroller programmin
To program the Atmel SAM3x8E from an external Host PC, it is possible to use the
standard Arduino IDE.
4.1. Download Arduino IDE
Download the Arduino IDE for free at the official website:
http://arduino.cc/en/Main/Software
Download the version for the O.S. used (must be 1.5.2 or newer release).
4.2. Install Arduino IDE
Once downloaded the appropriate IDE, the next step is installing the Arduino IDE.
Keep in mind the path (from now on referenced as <ARDUINO_IDE_PATH>) for
extraction of the archive previously downloaded.
It is necessary to update the IDE by inserting a patch inside the
<ARDUINO_IDE_PATH> to make it fully compatible with UDOO board.
4.2.1. Windows
Download the installer or the zip package.
If it has been downloaded the zip file, then it is necessary to remember the path
where the file has been unzipped. Instead, if it has been donwloaded the installer, it
will copy all files needed in the following default path: