Instructions / Assembly

Questions? Email [e-mail] or call 800-622-5510 Monday - Friday 8am-5pm EST
ORIGINAL CEDAR COMPOSTER ADD-ON KIT | ASSEMBLY INSTRUCTIONS
MODEL #
RCCOMPADK
DIMENSIONS
4ft. wide x 4ft. long
x 31in. high
PACKAGE CONTENTS
x2 x36
31in. x 2.5in. x 2.5in.
Corner Posts
4ft. Boards
Spacers
x21
.
BUILD A WALL
Hold a Board on the ground so it’s standing on edge with the
notched ends to the left and right. Slide a Corner Post down
over one notched end of the Board. Next, slide another Corner
Post over the other notched end. This forms a wall.
.
CONNECT THE WALL TO ONE SIDE OF THE EXISTING
COMPOSTER BIN
Extend two Boards parallel to each other from the Corner
Posts on one side of the existing Composter, and slide the
wall from Step One over the other ends to complete the base
of a three-sided frame.
.
BUILD THE ADD-ON COMPOSTER WALLS
Slide one Spacer into the top of each Corner Post, and push them
down so they are directly on top of the Boards on all three walls.
Then slide one Board down on top of the Spacers. If needed, tap
snugly into place with a rubber mallet.
Repeat with alternating Spacers and Boards to complete all three
Add-On Composter walls.
NEED HELP?
Contact customer service
instead of returing item to store.
800-622-5510 M
–
F 8
–
5
[e-mail]
INSTALL ATION SUPPORT
youtube.com/greenesfence
Note: Add-On Kits are not intended for use as free-standing
compost bins. They are specifically designed to be attached
to completed Greenes Composters only.