Full Product Manual

POWER SUPPLY ADAPTER FOR RING VIDEO DOORBELL AND RING VIDEO DOORBELL PRO MANUAL
PRODUCT SPECIFICATION
Input: AC120V 60Hz (US) / AC230V 60Hz (UK)
Output: AC18V 500mA
Cable Length: 1.50m
RING VIDEO DOORBELL
1. Make sure that the power is NOT connected.
2. Before setup, please ensures that the Ring Video Doorbell is well charged.
3 Connect the Wasserstein doorbell wiring to the terminal screws (J4 and J2) located on the mounng
bracket, using the screw driver provided in the original installaon package. Feed the wire from the back
of the bracket to the front and aach it to the underside of the screws. Screw the wire under J4 and J2.
There is no specic side in which the wires are required to be connected.
4 Install the mounng bracket to your desired locaon.
5 Place the Ring Video Doorbell onto the Mounng Bracket (slide up and click).
6 Tighten the security screws at the boom of the device.
7 Connect the adapter to the power supply.