Use and Care Manual

3
Glazing
Glazing
Glazing
Glazing
Glazing
Assembly course gable
(see also description from p.12 on)
(View from the outside)
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Floor prole Pos.1.1
Frame of doors right with hinge borings Pos.1.7
Frame of doors left Pos.1.6
Tallow-drop srew 4,2x13 Pos.12 (screw down only
after installation of door = (alignment possibility)
*Rose *Orchidee
730 x 728 1048 x 728
Crossbeam Pos.1.9 Crossbeam Pos.1.9
Frame of doors, top
Pos.1.8
Verge ashing pro
-
le right Pos.1.4
Verge ashing pro-
le , left Pos.1.5
Edge stay bars, left Pos.1.3
Edge stay bars, right Pos.1.2
View from inside
Connection sheet
Pos.2
Tallow-drop screw
4,2x13
Screw M6x12
+ nut
Detach edge stay bars on angle bracket
Glazing
Step 7
Only back wall gable!
Connection
sheet Pos.3
Cross-
beam Pos
(Inside view)
Attention! Introduce necessary screws
M6x12 in prole nut before assembly (at
Pos.1.8 and 1.9)
Groove on top!
Borings for door
locking device
angle bracket Pos.1
Crossbeam
Pos.1.9 to
screw down
with tallow-
drop screws
4,8x45 at both
sides
Screws M6 can also inserted later with
every prole with PVC-gliders.
Connect crossbeam with connection
sheets and inserted screws M6x12 and
nuts M12.*