Use and Care Manual

9
Proles for divided revolving door -at the bottom-
5.3.1
Door prole at the bottom
Door prole left
with borings for sash lock
Door prole right
with hinge borings
Door prole w. cross holes top
Rectangular tube w. cross holes
1 700
Pos.
Detail
Designation
Amount / Length
1 734
1 734
1 700
1 740
Accessories bag Geteilte Tür -unten-
Hinge
Sash lock
End cap for rectangular tube
T-sealing
2
1
Countersunk head screw 4,8x25 / Hingee
Countersunk head screw 3,5x22 / Sash lock
Glazing block 30x10x4
Countersunk head screw 4,2x45 / Türen
Tallow-drop screw3,5x38 / Rectangular tube
2
3
4
5
6
7
8
9
Pos.
Detail
Designation
Amount / Length
1
2
2 710
2 744
8
4
2
2
2
5.6
5.7
5.9
5.8
End cap Rectangular tube
Pos.3
Rectangular tube
and door prole
top with tallow-drop
screw3,5x38 Pos.8
to screw down.
Attention! Insert
sealing before
(see sketch above)
Countersunk head
screw 4,2x45 Pos.6
Door prole, top Pos.5.9
Door prole, left Pos.5.6
Door prole, at the bottom Pos.5.3.1
Rectangular tube 5.8
Door prole, right Pos.5.7
Glazing block*
Pos.9
View from outside
Lay out the proles according to illus-
tration on an even surface (possibly
on paperboard or similar).
Sash lock
Pos.10 with
screw 3,5x22
befestigen
*
Annotation: Sealing is bunched in one
hank for all the doors and windows, cut to
size, please.
*