Instructions / Assembly

Viceroy side table

ASSEMBLY INSTRUCTIONS

S-K-914NETE

Questions, problems, missing parts with this product? Please contact us

at www.numarkcustomerservice.com

Parts

table top

metal table leg (2 Metal Washers and 2

Bolts attached for each)

center ring

PAGE 1
Viceroy side table ASSEMBLY INSTRUCTIONS S-K-914NETE Questions, problems, missing parts with this product? Please contact us at www.numarkcustomerservice.
PAGE 2
Hardware Dc x 1 Allen wrench Db x 1 spare Da x 3 Screw Bolt Assembly instruction 1 Da B B Da x 3 Screw B A A Repeat procedure for the other two legs. Securely tighten all screws. 2 B Db Db x 6 Bolt (remove from the table leg) B C Db Metal Washer x 6 (remove from the table leg) C Note: the arrow on the sticker should be towards down. Repeat procedure for the other two legs. Turn the table over. Securely tighten all bolts. Now your table is ready for use.