FAQ

La Crosse Technology, Ltd. Page 7
• Stucco held to the wall by a metal mesh will cause interference.
• Transmitting antennas from: ham radios, emergency dispatch centers, airports, military
bases, etc. may cause interference.
• Electrical wires, utilities, cables, etc. may create interference if too close.
• Vegetation is full of moisture and reduces signal.
• Dirt: Receiving a signal through a hill is difficult.
WEATHER STATION
12-HOUR TIME FORMAT
• Time display: 12-hour or 24-hour format.
• Default is 12-hour time.
• Use the Program Menu to switch time formats.
POWER REQUIREMENTS
• 5 volt power cord and 3-AA Alkaline batteries power the weather station.
MANUALLY SET TIME: PROGRAM MENU
• The
SET button
will move through the program menu.
• The
+ or - button
will adjust values.
• Press the
LIGHT
button at any time to exit.
Program Menu:
• Language (English, Español, Francais)
• Beep On/Off
• Atomic time signal (On/Off)
• DST (Daylight Saving Time On/Off)
• Time Zone
• 12/24 Hour time format
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit/Celsius
• Pressure units: InHg or hPa
• Pressure number setting
The
SET
button will move through the program menu. To change a value use the
+ or -
button.
1. Hold the SET button five seconds so that ENGLISH shows. Press and release the + or –
button to select a different language. Confirm with the SET button and move to the
beep sound, on or off.
2. BEEP and the word ON will flash. Press and release the + or - button to turn this to OFF
to avoid beep sounds when pressing a button. Confirm with the SET button and move
to atomic time (WWVB ON/OFF).