Product Literature

Applications: Semi-automatic compact suction filters with a 90º inlet/outlet
Standard Characteristics:
• Filter element: - Stainless Steel screen AISI 316, supported by a PVC cylinder .
• Available filtration grades: from 120 micron
• Filter housing material of construction: Carbon Steel ST37.2
• Pre-treatment: sand blasting up to Sa 2.5 grade
• Exterior & Interior coating: electrostatic oven baked polyester-epoxy powder coating with a thickness of 150-200
micron
• Connections: Victaulic, Threaded socket and Flange
• Maximum recommended working pressure: up to 10 bar (145 psi).
• Minimum operating working pressure during flushing: 1 bar (14.5 psi)
• Equipped with a mechanical DP which indicates when the pressure difference of 5m is exceeded
• Clean screen pressure loss: up to 0.1 bar (1.45psi)
Operation:
Water flows through the inlet along and through the cylindrical screen trapping the solids on the screen. The filter can be
manually cleaned while still pressurized and without removing the screen. The operator cleans the screen by opening
the flush valve and turning the handle, fully up and the back down. As a result the suction nozzles traverse the entire
screen removing trapped debris. The whole process takes a few seconds.
10.2019
Model
In/Out
D
(in)
D1 (in)
Maximum
Flow Rate
(GPM)
Flushing
Flow rate
(GPM)
X
(in)
X1
(in)
Y
(in)
H
(in)
H1
(in)
Shipping
Weight
(lb)
Packaging Volume
(ft)
SA502C
2 6
110 26
4.83
10.62
6.9
23.2
25.1
26 2.0x1.0x1.0
SA503C
3 6
200 35
6.46
12.07
7.7
31.1
33.4
53 1.0x1.0x2.6
SA504C
4 8
350 35
7.46
13.90
11.0
36.7
38.6
66 1.1x1.1x3.2
Series SA500C - Compact
Semi-Automatic Filters
The Toro Company | Ag Business | 1588 N. Marshall Avenue, El Cajon, CA 92020-1523, USA | Tel: + 1 [phone] or + 1 [phone] | toro.com/agriculture