Use and Care Manual

ADJUSTMENTS GUIDE

ADJUSTING THE BALANCE

In order to achieve a smooth and comfortable ride, you must ensure

that the stability of the bike is secured. If you notice that the bike is

unbalanced, you should adjust the foot pads located beneath the front

and rear stabilizers. To do so, simply rotate the Foot Pad (No. 15)

until the bike becomes level with the floor surface. To raise the foot

pad, turn it counter-clockwise; to lower the foot pad, turn it clockwise.

When you have finished adjusting the foot pad, re-tighten the

Hexagon Nut (No. 91) by turning it counter-clockwise using

Crosshead Spanner (No. 81). If required, repeat this process to

adjust the remaining foot pads.

ADJUSTING THE SEAT

The seat of this bike is fully adjustable as it moves Up, Down, Fore

(forward), Aft (backward).

To adjust the height of the seat post, loosen and pull Adjustment

Knob (No. 9) outward, then raise or lower the seat to the desired

height. Once adjusted, re-insert and tighten the Adjustment Knob

(No. 9) to secure the seat in place.

To adjust the seat back and forth, loosen Adjustment Knob (No. 7),

then slide the seat slider to the desired position. Once positioned,

tighten the Adjustment Knob (No. 7) to secure the seat slider in

place.

ADJUSTING THE TENSION & EMERGENCY STOP

Adjust the tension by rotating the Tension Control Knob (No. 39)

clockwise to increase the resistance. Rotate the Tension Control

Knob (No. 39) counter-clockwise to decrease the resistance.

Push down the Tension Control Knob (No. 39) to enforce brake and

stop the bike immediately.

TRANSPORTING THE BIKE

To move the bike, first stand at the front of the bike so that you’re

directly in front of the handlebar. Firmly grasp and hold each side of

the Handlebar (No. 5), place one foot on the Front Stabilizer (No.

56) and tilt the bike towards you until the transportation wheels on the

Front Stabilizer (No. 56) touch the ground. With the wheels on the

ground, you can transport the bike to the desired location with ease.

NOTE: When moving the bike, always move with caution as

unexpected impact, such as dropping the bike, may cause injury and

affect the bike’s operation.