Use and Care Manual

7
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [e-mail] or 1- 877 - 90SUNNY (877-
907-8669).
STEP 4:
Note: The Pedals (No. 88L & No. 88R) are marked
"L" and "R" for Left and Right.
WARNING! Read instructions carefully as
improper assembly may cause permanent damage
to your bike.
Remove the 2 Right & Left Nylon Nuts (No. 84 &
No. 85) located on the Pedals (No. 88R & No. 88L)
with Universal Wrench (No. 80).
Turn the Tension Control Knob (No. 39)
clockwise as tightly as you can with your hand.
Align the Left Pedal (No. 88L) with the Left Crank
(No. 87) at 90°. Turn the pedal bolt on Left Pedal
(No. 88L) counter-clockwise as tightly as you can
with your hand. Then, use Crosshead Spanner
(No. 81) to tighten and secure.
Turn the Left Nylon Nut (No. 85) clockwise as
tightly as you can with your hand. Use Crosshead
Spanner (No. 81) to hold the pedal bolt on Left
Pedal (No. 88L) and use Universal Wrench (No.
80) to turn the Left Nylon Nut (No. 85) clockwise
at the same time, until it is tightened onto the Left
Crank (No. 87).
Align the Right Pedal (No. 88R) with the Right
Crank (No. 86) at 90°. Turn the pedal bolt on Right
Pedal (No. 88R) clockwise as tightly as you can
with your hand. Then, use Crosshead Spanner
(No. 81) to tighten and secure.
Turn the Right Nylon Nut (No. 84) counter-
clockwise as tightly as you can with your hand. Use
Crosshead Spanner (No. 81) to hold pedal bolt on
Right Pedal (No. 88R) and use Universal Wrench
(No. 80) to turn the Right Nylon Nut (No. 84)
counter-clockwise until it is tightened onto the
Right Crank (No. 86).
The assembly is complete!
#80 δ3 (151X43.5) 1pc
#81 S=13,14,15 1pc
#85 9/16"-LH 1pc
#84 9/16" 1pc
39