ENERGY FLEX MOTORIZED TREADMILL SF-T7724 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669).
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1.
EXPLODED DIAGRAM 2
ASSEMBLY CONTENTS WHEN YOU OPEN THE CARTON, YOU WILL FIND THE FOLLOWING PARTS: Main Frame (No. 2) Safety Key (No. 76) MP3 Wire (No. 77) Half-roundhead Hex Bolt (No. 55) – 4pcs Serrated Gasket (No. 56) - 6pcs Half-roundhead Hex Bolt (No. 38) - 2pcs Silicone Oil (No. 81) Allen Wrench (No. 82) Allen Wrench (No.
PARTS LIST No. Description Spec. Qty. No. Description Spec. Qty. 1 Base Frame 1 29 Running Belt 2785*460*1.6 1 2 Main Frame 1 30 Motor Belt 210-J6 1 3 Left Support Tube 1 31 Cylinder 610*260-35kg 1 4 Right Support Tube 1 32 Incline Bushing Ø15* Ø10*9 4 5 Computer Bracket 1 33 Flat Washer Ø20* Ø 10.5*2 6 6 Incline Bracket 1 34 Flat Washer Ø16* Ø 8.5*1.2 14 7 Side Rail Support 10 35 ST4.2*13 24 8 Retainer Plate 2 36 ST4.
No. Description Spec. M8 Qty. No. Description Spec. Qty.
ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.comor 1-877-90SUNNY (877-907-8669). STEP 1: Open the carton and remove all contents. Place the Main Frame (No. 2) on level ground and ensure that you have a clean, adequate work space. Follow the diagram on the left to lift the top console upright.
We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.comor 1-877-90SUNNY (877-907-8669). STEP 3: Secure the Top Console (No. 84) to both support tubes using 2 Half-roundhead Hex Bolts (No. 55) and 2 Serrated Gaskets (No. 56). Tighten and secure with Allen Wrench (No. 82). STEP 4: You may now remove the packing belt. Next, insert the Safety Key (No. 76) into the console.
LUBRICATING THE TREADMILL IMPORTANT NOTE: You will need to lubricate your treadmill before the first use! RUNNING BELTS & TREADMILL LUBRICANT: Lubricating the Running Belt (No. 29) & Running Board (No. 28) is essential as the friction between the two affects the life span and operations on the treadmill. Inspect the running Running Belt (No. 29) regularly. If you find any wear on the Running Board (No. 28), please contact us at support@sunnyhealthfitness.com.
MAINTENANCE GUIDE General cleaning will help to prolong the life and improve performance of your treadmill. Keep the unit clean and maintained by dusting the components on a regular basis, cleaning the two exposed sides of the Running Belt (No. 29) will prevent dust from accumulating underneath. Keep your running shoes clean so that dirt from the shoes does not wear the Running Board (No. 28) and Running Belt (No. 29). Clean the surface of the Running Belt (No. 29) using a clean, damp cloth.
FOLDING INSTRUCTIONS NOTE: Please make sure the incline is at ZERO when folding and unfolding. FOLDING: To fold the treadmill, place your hands at the end of the running board and lift the running board all the way up until you hear the safety lock ‘Click’ from the safety cylinder. UNFOLDING: To unfold the treadmill, simply give the safety cylinder a light kick and pull down the running board at the same time. With its soft drop system, the machine will unfold slowly.
INCLINE INSTRUCTIONS Console Keys and + - INCLINE Handrail Keys are used to control the incline level. Increase or decrease the incline level by pressing the incline buttons once per level or holding an incline key down to skip through to the desired level. INCLINE LEVELS (0%) = 1.75° (1%) = 1.90° (2%) = 2.2° (3%) = 2.5° (4%) = 2.85° (5%) = 3.15° (6%) = 3.5° (7%) = 3.75° (8%) = 4.10° (9%) = 4.40° (10%) = 4.75° (11%) = 5.05° (12%) = 5.40° (13%) = 5.70° (14%) = 6.00° (15%) = 6.
HOW TO MOVE THE TREADMILL Before attempting to move the treadmill, make sure that it has been properly folded. Then, unplug the power cord. To tilt, start by placing one hand at position "P" to support the top end of the treadmill. Next, place one foot at position "K" to hold the bottom end of the treadmill steady. With your foot at "K", slowly tilt the top of the treadmill downward towards the ground. Once the Main Frame "P" reaches a low enough point, the wheels of the treadmill will touch the ground.
IMPORTANT ELECTRICAL INFORMATION IMPORTANT NOTE: This treadmill requires a power source of 110 Volts in order to properly operate. For your safety, as well as the safety of others, please verify that the power source is correct before powering the equipment. Any power supply source above or below this level could cause significant damage to the equipment and/or user. GROUNDING METHODS: This product must be grounded.
THE DISPLAY CONSOLE WINDOW DISPLAY The treadmill will start after a 3 second countdown. 1. PROGRAM: In addition to manual mode, there are 16 preset programs (P1-P16) and 3 user programs (U1-U3). 2. SPEED: The speed range is 0.6-10 MPH. The initial default speed is 0.6 MPH. 3. TIME: Displays the elapsed running time or countdown time (0:00~99:59MIN). Once the time has elapsed past 99:59 MINS, you may press the + key to reset it back to 0:00. 4.
2. PAUSE: Press to pause your current workout session. NOTE: Pressing STOP once will stop the treadmill. Current workout data is retained. You can press START to continue the workout or press STOP again to clear current workout data. 3. SPEED +/- KEYS: During use, use these +/- keys to increase or decrease your speed. The speed will adjust 0.1 MPH at a time. 4. PROG (PROGRAM) BUTTON: Press the PROG button while the treadmill is not running to manually cycle through and choose a program.
PROGRAMS Each program is divided into 16 exercise segments in an equal time division.
USER PROGRAMS (U1-U3): Each program is made up of 16 segments. User Programs allow you to personalize each segment of your exercise program by programming each individual segment’s time duration, desired speed, and incline. To begin, press the PROG button to select U1, U2, or U3 then press MODE to enter the setting mode and set the TIME of the 1st segment. Next, set the desired SPEED of the 1st segment by pressing the SPEED +/- keys and set the INCLINE by pressing the INCLINE +/- keys.
BLUETOOTH INSTRUCTIONS The SF-T7724 ENERGY FLEX MOTORIZED TREADMILL is designed to provide you with the most efficient workout. Syncing your treadmill with Bluetooth would enable you to listen to your favorite tunes on your music app from your treadmill. Don’t worry about getting distracted with a phone call while on the treadmill.
EXERCISE INSTRUCTIONS GETTING STARTED: Before starting any exercise programs, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the treadmill properly. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health.
TROUBLESHOOTING Code ----- E01 Description Safety key fault. Communication abnormality: no communication from the console to the control board. How to Troubleshoot 1. Insert the safety key properly. 2. Replace the safety key sensor or safety key. If there’s still a problem, replace the console. Possible Reasons: Communication obstructed between control board and console, please check to make sure the wires are connected properly, and the wires are without any punctures or damage.
