Use and Care Manual

8
LUBRICATING THE TREADMILL
IMPORTANT NOTE:
You will need to lubricate your treadmill before the first use!
RUNNING BELTS & TREADMILL LUBRICANT:
Lubricating the Running Belt (No. 29) & Running Board (No. 28) is essential as the friction
between the two affects the life span and operations on the treadmill. Inspect the running Running
Belt (No. 29) regularly. If you find any wear on the Running Board (No. 28), please contact us at
[e-mail].
WARNING: Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or
repairing the unit.
The following time table is recommended:
⚫ Light user (less than 3 hours/ week) every 2 months
⚫ Medium user (3-5 hours/ week) every 45 days
⚫ Heavy user (more than 5 hours/ week) every month
NOTE:
To better maintain the treadmill and prolong its life, it is suggested that the treadmill be powered off
for 10 minutes every 2 hours and fully powered off when not in use.
A loose Running Belt (No. 29) will result in the runner sliding off when in use, while too tight of a
Running Belt (No. 29) will result in decrease to the motors performance and create more friction
between the roller and Running Belt (No. 29). The most suitable tightness for the Running Belt
(No. 29) is pulled out 50-75mm from the Running Board (No. 28).