Use and Care Manual

9
FOLDING INSTRUCTIONS
FOLDING:
1. Spin up the Left & Right Handlebars (No. 7 & No. 8) as shown in picture A-A.
2. Unscrew the 2 Rotary Knobs (No. 63) about 10 times until the Rotary Knobs (No. 63) are
taken out, then put down the upright tubes as the picture A-C. Screw back the 2 Rotary Knobs
(No. 63).
3. Hold the end of the treadmill with both hands and slowly lift the end of the treadmill until it
reaches the position as shown in picture A-D. Have one hand supporting the treadmill, use the
other hand to lift the Base Frame (No. 2) and rotate downwards. Gently press down the Base
Frame (No. 2) to the lowest position with your foot as shown in picture A-D. Continue until you
hear the locking sound from the Base Frame (No. 2) to the main frame.
The folding is complete!
NOTE: If the Rotary Knob (No. 63) does not move, you can shake the upright tubes and the
computer set then rotate. Put the treadmill close to the wall to store. Do not allow children to climb
on treadmill.
UNFOLDING:
1. Hold the end of the treadmill with both hands and place one foot on the Base Frame (No. 2).
Push the treadmill forward a little, using one foot to hook up and rotate the Base Frame (No. 2)
until it reaches the highest position. Keep supporting the end of the treadmill with both hands.
Move your foot away from the treadmill, then gently put down the treadmill as shown in picture
(A-B).
2. Unscrew the 2 Rotary Knobs (No. 63) until they are taken out. Pull up the upright tubes and
screw the 2 Rotary Knobs (No. 63) back to the upright tubes tightly as shown in picture A-C.
3. Spin up the Left & Right Handlebars (No. 7 & No. 8) to the horizontal position as shown in
picture A-D.